Error Code List.pdf - 第31页

AV131 ERROR CODE LIST 2.4 Errors D79EEC- 91-210-A 0 2.4- 8 1705 Handle i nt er lock DESCRI PTIO N Pu shin g H ax is ro ta tio n w he e l wa s de te cte d. CAUSE H ax i s whe e l dete cti on (800C 3: bi t2) was de tected …

AV131

ERROR CODE LIST

2.4 Errors

D79EEC-91-210-A0

2.4-7

1700

XY interlock (Right rail)

DESCRIPTION

Interlock was detected between XY table and right rail.

CAUSE

While XY table is moving right rail traverse limit sensor (80000:bit0) was detected.

SOLUTION

Please confirm whether right rail is down position. Please confirm right rail traverse limit sensor.

NOTE

1701

XY interlock (Left rail)

DESCRIPTION

Interlock was detected between XY table and left rail.

CAUSE

While XY table is moving left rail traverse limit sensor (80040:bit4) was detected.

SOLUTION

Please confirm whether left rail is down position. Please confirm left rail traverse limit sensor.

NOTE

1702

Auto width interlock

DESCRIPTION

Auto width interlock was detected.

CAUSE

Interlock signal was input while auto width running.

It tried to operate auto width axis with the interlock signal input.

SOLUTION

Please confirm interlock signal. Interlock signal to which the auto width refers is as follows.

<Interlock signal> PCB detection 1 (80000:bit2) PCB detection 2 (80000:bit3) PCB detection 3 (80040:bit6) PCB

detection 4 (80040:bit7) XY table PCB detection (80003:bit0)

Right belt motor output (Positive rotation 80020:bit2) (Reverse rotation 80020:bit3)

Left belt motor output (Positive rotation 80060:bit2) (Reverse rotation 80060:bit3)

Safety cover (80581:bit0/bit1/bit2/bit3) Emergency input (80581:bit4/bit5/bit6/bit7)

XY axis origin (NC origin) H axis origin (M.ORG)

NOTE

1703

Air down interlock

DESCRIPTION

Air pressure was down.

CAUSE

Air down sensor (80002:bit5) was detected while machine was running.

SOLUTION

Please confirm whether the air pressure is correct.

NOTE

1704

Brake switch interlock

DESCRIPTION

H axis brake switch became a release side.

CAUSE

Brake SW input (80081:bit5) was release side while H axis was running.

SOLUTION

Please switch the brake switch to a lock side.

NOTE

AV131

ERROR CODE LIST

2.4 Errors

D79EEC-91-210-A0

2.4-8

1705

Handle interlock

DESCRIPTION

Pushing H axis rotation wheel was detected.

CAUSE

H axis wheel detection (800C3:bit2) was detected while H axis was running.

SOLUTION

Please return H axis rotation wheel to original position.

NOTE

1706

Feeder float interlock (Left)

DESCRIPTION

Feeder float interlock of left part supply unit was detected.

CAUSE

ZL feeder float detection sensor (80041:bit1) was detected while ZL axis was running.

SOLUTION

Please confirm the setting of part supply unit left feeder.

NOTE

1707

Feeder float interlock (Right)

DESCRIPTION

Feeder float interlock of right part supply unit was detected.

CAUSE

ZR feeder float detection sensor (80001:bit6) was detected while ZR axis was running.

SOLUTION

Please confirm the setting of part supply unit right feeder.

NOTE

1708

Power failure interlock

DESCRIPTION

The power failure was detected while the machine was running.

CAUSE

Power failure (80580:bit7) was detected while the machine was running.

SOLUTION

Please turn power failure reset signal (805A0:bit7) on and off by the [Output check] of [Machine adjustment] to reset

power failure.

NOTE

1709

θH axis plus overrun interlock

DESCRIPTION

The plus overrun interlock of the θH axis was detected.

CAUSE

θH plus overrun (800C1:bit2) was detected while the θH axis was running. θH axis is located near mechanical

stopper.

SOLUTION

Please confirm θH plus overrun detection. Please confirm θH axis position.

NOTE

1710

θA axis plus overrun interlock

DESCRIPTION

The plus overrun interlock of the θA axis was detected.

CAUSE

θA plus overrun (80041:bit4) was detected while the θA axis was running. θA axis is located near mechanical

stopper.

SOLUTION

Please confirm θA plus overrun detection. Please confirm θA axis position.

NOTE

AV131

ERROR CODE LIST

2.4 Errors

D79EEC-91-210-A0

2.4-9

1711

θA axis minus overrun interlock

DESCRIPTION

The minus overrun interlock of the θA axis was detected.

CAUSE

θA minus overrun (80041:bit6) was detected while the θA axis was running. θA axis is located near mechanical

stopper.

SOLUTION

Please confirm θA minus overrun detection. Please confirm θA axis position.

NOTE

1712

V axis plus overrun interlock

DESCRIPTION

The plus overrun interlock of the V axis was detected.

CAUSE

V plus overrun (80082:bit0) was detected while the V axis was running. V axis is located near mechanical stopper.

SOLUTION

Please confirm V plus overrun detection. Please confirm V axis position.

NOTE

1713

V axis minus overrun interlock

DESCRIPTION

The minus overrun interlock of the V axis was detected.

CAUSE

V minus overrun (80082:bit2) was detected while the V axis was running. V axis is located near mechanical stopper.

SOLUTION

Please confirm V minus overrun detection. Please confirm V axis position.

NOTE

1714

X axis plus/minus overrun interlock

DESCRIPTION

The plus/minus overrun interlock of the X axis was detected.

CAUSE

X plus/minus overrun (80582:bit5) was detected while the X axis was running. X axis is located near mechanical

stopper.

SOLUTION

Please confirm X plus/minus overrun detection. Please confirm X axis position.

NOTE

1715

Y axis plus/minus overrun interlock

DESCRIPTION

The plus/minus overrun interlock of the Y axis was detected

CAUSE

Y plus/minus overrun (80582:bit4) was detected while the Y axis was running. Y axis is located near mechanical

stopper.

SOLUTION

Please confirm Y plus/minus overrun detection. Please confirm Y axis position.

NOTE

1716

ZL/ZR axes plus overrun interlock

DESCRIPTION

The plus overrun interlock of the ZL/ZR axes was detected.

CAUSE

ZL/ZR plus overrun (80582:bit7) was detected while the ZL/ZR ax was running. ZL/ZR axes is located near

mechanical stopper.

SOLUTION

Please confirm ZL/ZR plus overrun detection. Please confirm ZL/ZR axes position.

NOTE