SYS-CP842-1.1E.pdf - 第4页

The manuals listed below are shipped with the NXT machine. CP-842E/CP-842ME Operator ’ s Guid e CP-842E/CP-842ME System Reference CP-842E/CP-842ME Mechanical Reference In order to operate this machine in the safest and m…

Consult Fuji beforehand if you are considering selling this

equipment to a third party after it has been installed.

The manuals listed below are shipped with the NXT machine.

CP-842E/CP-842ME Operator’s Guide

CP-842E/CP-842ME System Reference

CP-842E/CP-842ME Mechanical Reference

In order to operate this machine in the safest and most efficient manner,

please read the provided manuals thoroughly and observe all instructions

and warnings.

Keep these manuals in an accessible location near the machine to enable

them to be easily used when needed.

High-Speed Chip Placer

CP-842E

CP-842ME

System Reference

SYS-CP842-1.1E

Copyrights

All rights regarding this manual are reserved by Fuji Machine Manufacturing Co., Ltd. This manual may

not, in whole or in part, be reproduced by any means (electronic, mechanical or otherwise), or reused in

any way, without the prior written permission of Fuji Machine Manufacturing Co., Ltd.

Trademark Rights

is a trademark of Fuji Machine Manufacturing Co., Ltd., and registered in the following

countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Indonesia, Ireland, Italy, Japan,

Korea, Luxembourg, the Netherlands, Portugal, Spain, Sweden, the U.K., and the U.S.A.

Warranty and Liability

Fuji Machine Manufacturing Co., Ltd. accepts no responsibility for situations that may arise due to any of

the following:

• The use of third party parts.

• The use of non-genuine Fuji parts.

• Incorrect settings made by the customer.

• Improper use of Fuji equipment.

Notice

Fuji Machine Manufacturing Co., Ltd. reserves the right to change the content of this manual without

notice.

Every effort has been made to ensure that this manual is correct in every detail. However, please contact

Fuji in the unlikely event that errors or omissions are detected.

Fuji Machine Manufacturing Co., Ltd. accepts no liability whatsoever for damages that may arise as a

result of this manual, with the exception of problems that originate in our products.