00192809-01.pdf - 第21页
User Manual V 1.15 - Productivity Lift 2 Safety Software version V 40. 1 1 Edition 01/2001 2.5 Transport and assembly loc ks 13 7 UDQV SRUWDQG DVVH PEO\ ORFNV 'LVFRQQHFWLQJFRPSUHVVHGDLUV XSSO\ :$ 5 1…
2 Safety User Manual V 1.15 - Productivity Lift
2.4 ESD guidelines Software version V 40.11 Edition 01/2001
12
0DLQWHQDQFHDQGFOHDQLQJ
$77(17,21
In order to maintain or clean the device the installation safety, described in 2.5.1, has to be fixed
and the device as well as air pressure of the filter regulation have to be switched off. The main
switch has to be locked with a personal padlock in order to avoid an unintentional switch on. The
subsequent requisite work must be carried out with due care and attention. In the small interior
space of the device, there is a slight risk that the person carrying out the work could scratch them-
selves on corners or edges, although the production process does endeavour to ensure that the
parts have no sharp edges or corners.
'LVFRQQHFWLQJFRPSUHVVHGDLUVXSSO\
:$51,1*
Do not loosen a compressed air line without making sure that the corresponding air service unit
is pressureless by opening the hand slide discharge valve or alternatively by closing the main
valve of the compressed air supply.
&RGHQXPEHU
The code number requested in the configuration may only be known to one authorised person and
may not be passed on by this person to unauthorised persons.
5HVLGXDOKD]DUGVIRUREMHFWV
There are no other factors that pose a threat to objects, property or the environment.
(6'JXLGHOLQHV
Please comply with the notes concerning the ESD guidelines as they are specified in the operating
instructions of the placement machine.
User Manual V 1.15 - Productivity Lift 2 Safety
Software version V 40.11 Edition 01/2001 2.5 Transport and assembly locks
13
7UDQVSRUWDQGDVVHPEO\ORFNV
'LVFRQQHFWLQJFRPSUHVVHGDLUVXSSO\
:$51,1*
Do not loosen a compressed air line without making sure that the corresponding air service unit
is pressureless by opening the hand slide discharge valve or alternatively by closing the main
valve of the compressed air supply.
/RFNLQJWKHOLIWEHOW
:$51,1*
The installation aid shown in the figures serves to lock the lift during servicing, maintenance work,
for example, when changing the toothed belt, and during transport. Any activity that involves a per-
son having to intervene in the lift area in any way should result in the following locking measures
being taken as described below. After the activities are finished and before the device is turned
on again all securities have to be removed and to be deposed at the right place.
1. The following picture shows where the installation aid is kept when it is not in use.
2 Safety User Manual V 1.15 - Productivity Lift
2.5 Transport and assembly locks Software version V 40.11 Edition 01/2001
14
2. Before carrying out any work that is required at either of the two lift units, the installation lock
must be secured as shown in the figure below on the guide shaft underneath the lift. To this
end, the lift must be transported to its uppermost position.
/RFNLQJWKHXSSHUOLIWEHOW
:$51,1*
The installation aid shown in the figures serves to lock the upper lift belt during servicing, mainte-
nance work and transport. Any activity that involves a person having to intervene in any way in the
area between the upper lift belt and the lift belt should result in the following locking measures be-
ing taken as described below. After the activities are finished and before the device is turned on
again all securities have to be removed and to be deposed at the right place.