00192809-01.pdf - 第52页
5 Configuration User M anual V 1.15 - Productivity Lift 5.16 Reference width 2 Software version V 40. 1 1 Edit ion 01/2001 44 5HIHUHQFHZLG WK This setti ng def ines the referen ce width o f the Shutt le Conv eyor…
User Manual V 1.15 - Productivity Lift 5 Configuration
Software version V 40.11 Edition 01/2001 5.15 Reference width 1 - Option
43
$GGUHVVZLGWK
5HIHUHQFHZLGWK2SWLRQ
This setting defines the reference width of the Top Conveyor (only option). This setting allows the
matching of displayed width and actual width of the Top Conveyor transport. By changing the set-
ting the width is increased or decreased. A typical value is between 0480 - 0490.
This menu item is only available, if the function "Width adjusting 1" is activated (chapter 5.11). The
standard configuration is not equipped with an automatic width setting of the Top Conveyor.
The lowest increment is [0.1mm].
Address width 2
0000
Reference width 1
0480
5 Configuration User Manual V 1.15 - Productivity Lift
5.16 Reference width 2 Software version V 40.11 Edition 01/2001
44
5HIHUHQFHZLGWK
This setting defines the reference width of the Shuttle Conveyor. This setting allows the matching
of displayed width and actual width of the Shuttle Conveyor. By changing the setting the width is
increased or decreased. A typical value is between 0480 - 0490.
This menu item is only available, if the function "Width adjusting 2" is activated (chapter 5.12). The
standard configuration is equipped with an automatic width setting of the Shuttle Conveyor.
The unit of value is [0.1mm].
Reference width 2
0480
User Manual V 1.15 - Productivity Lift 5 Configuration
Software version V 40.11 Edition 01/2001 5.17 Reference width 3
45
5HIHUHQFHZLGWK
This setting defines the reference width of the Underfloor Conveyor. This setting allows the match-
ing of displayed width and actual width of the Underfloor Conveyor. By changing the setting the
width is increased or decreased. A typical value is between 0480 - 0490.
This menu item is only available, if the function "Width adjusting 3" is activated (chapter 5.13). The
standard configuration is equipped with an automatic width setting of the Underfloor Conveyor.
127(
If the lift is implemented as an end module, this menu does not appear.
The unit of value is [0.1mm].
0D[ZLGWKERDUG
Here the maximum transport width permissible for the system is set. The unit of value is [0.1mm].
The setting range is between 500 and 4600, which corresponds to a width of 50mm to 460mm.
Reference width 3
0490
Max. width board
2160