00192809-01.pdf - 第48页
5 Configuration User M anual V 1.15 - Productivity Lift 5.12 Width adjusting 2 Software version V 40. 1 1 Edition 01/2001 40 : LG WKDGMXVWLQJ This men u has to be used to set the mode for op eration of the automa…
User Manual V 1.15 - Productivity Lift 5 Configuration
Software version V 40.11 Edition 01/2001 5.11 Width adjusting 1
39
:LGWKDGMXVWLQJ
This menu can be used to set the mode for operation of the automatic tracking facility (option) for
width adjustment for the lift belt top.
The following are possible:
turned off : The device has no electrical width adjustment (standard).
manual : The device has an electrical width adjustment facility but no automatic track-
ing facility. The width must be adjusted in the manual-operating mode using
the corresponding function.
automatic : The device has an automatic tracking facility. This setting is then used to
constantly check the transport width of the device, which prescribes the
width.
only at start : The device has an automatic tracking facility. This setting is then used to
check the transport width of the device, which prescribes the width, but only
at the start of the lift.
Width adjusting 1
manual
5 Configuration User Manual V 1.15 - Productivity Lift
5.12 Width adjusting 2 Software version V 40.11 Edition 01/2001
40
:LGWKDGMXVWLQJ
This menu has to be used to set the mode for operation of the automatic tracking facility for width
adjustment for the shuttle.
The following are possible:
turned off : The device has no electrical width adjustment (standard).
manual : The device has an electrical width adjustment facility but no automatic track-
ing facility. The width must be adjusted in the manual-operating mode using
the corresponding function.
automatic : The device has an automatic tracking facility. This setting is then used to
constantly check the transport width of the device, which prescribes the
width.
only at start : The device has an automatic tracking facility. This setting is then used to
check the transport width of the device, which prescribes the width, but only
at the start of the lift.
Width adjusting 2
manual
User Manual V 1.15 - Productivity Lift 5 Configuration
Software version V 40.11 Edition 01/2001 5.13 Width adjusting 3
41
:LGWKDGMXVWLQJ
This menu has to be used to set the mode for operation of the automatic tracking facility for width
adjustment of the Underfloor Conveyor. This menu isn’t active, if the unit is an output modul.
The following are possible:
turned off : The device has no electrical width adjustment (standard).
manual : The device has an electrical width adjustment facility but no automatic track-
ing facility. The width must be adjusted in the manual-operating mode using
the corresponding function.
automatic : The device has an automatic tracking facility. This setting is then used to
constantly check the transport width of the device, which prescribes the
width.
only at start : The device has an automatic tracking facility. This setting is then used to
check the transport width of the device, which prescribes the width, but only
at the start of the lift.
Width adjusting 3
manual