00192809-01.pdf - 第71页
User Manual V 1.15 - Productivity Lift 7 Manual mode Software version V 40. 1 1 Edit ion 01/2001 7.1 Manual mode 1 - Lift 1 63 0 D Q X D O P R G H In the m anual mod e, the i ndividu al func tions can b e teste d with…
6 Set-up mode User Manual V 1.15 - Productivity Lift
6.10 PCB inspection 2 Software version V 40.11 Edition 01/2001
62
User Manual V 1.15 - Productivity Lift 7 Manual mode
Software version V 40.11 Edition 01/2001 7.1 Manual mode 1 - Lift 1
63
0DQXDOPRGH
In the manual mode, the individual functions can be tested with the aid of the cursor keys.
The "Hand" key is used for change over in the manual mode.
0DQXDOPRGH/LIW
Test function for the top conveyor.
The cursor keys "▲" and "▼" can be used to move the top conveyor upwards and downwards,
while the "ALT" key can be used to switch the belt drive on for as long as the key is pressed down.
The conveyor can only be moved downwards if the shuttle is in its lower position.
The "Enter" key can be used to proceed to the next test function. To cancel the procedure, exit
the menu using the "Start/Stop" key.
Manual mode 1
Lift 1
7 Manual mode User Manual V 1.15 - Productivity Lift
7.2 Manual mode 2 - Lift 2 Software version V 40.11 Edition 01/2001
64
0DQXDOPRGH/LIW
Test function for the shuttle.
The cursor keys "▲" and "▼" can be used to move the shuttle upwards and downwards, while the
"ALT" key can be used to switch the belt drive on for as long as the key is pressed down. The
shuttle can only be moved upwards if top conveyor is in its upper position.
The "Enter" key can be used to proceed to the next test function. To cancel the procedure, exit
the menu using the "Start/Stop" key.
0DQXDOPRGH6KXWWOH
Test function for the shuttle.
The cursor keys "▲" and "▼" can be used to move the shuttle in back and forth direction.
The "Enter" key can be used to proceed to the next test function. To cancel the procedure, exit
the menu using the "Start/Stop" key.
Manual mode 2
Lift 2
Manual mode 3
Shuttle