SOM-2080-001_w.pdf - 第78页
75 SOM-2080 Erroe ID Error Name, Description, Cause, and Remedy 441629 Tray Feeder Zeroing Error Tray feeder zeroing operation error ----- 44162a Tray Feeder Zeroing Error Tray feeder zeroing operation error ----- 44162b…
74
SOM-2080
Erroe ID Error Name, Description, Cause, and Remedy
44161a Tray Feeder Zeroing Error
Pallet chuck CLOSE error
-----
44161b Tray Feeder Zeroing Error
Rack shutter CLOSE error
-----
44161c Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
44161d Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
44161e Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
44161f Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
441620 Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
441621 Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
441622 Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
441623 Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
441624 Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
441625 Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
441626 Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
441627 Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
441628 Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
6.5 Tray Feeder 2
1005-001
75
SOM-2080
Erroe ID Error Name, Description, Cause, and Remedy
441629 Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
44162a Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
44162b Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
44162c Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
44162d
Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
44162e
Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
44162f Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
441630 Tray Feeder Zeroing Error
Pre-check error in the tray resupply traverse zeroing operation
-----
441631 Tray Feeder Zeroing Error
A residual pallet was detected. Open the resupply cover and retrieve the pallet.
[B6217]
-----
441632 Tray Feeder Zeroing Error
Tray resupply traverse pallet chuck clamp error [Y6237]
-----
441633 Tray Feeder Zeroing Error
The shutter opening operation on the pallet discharge spout was not completed
on time. [Y6238]
-----
441634 Tray Feeder Zeroing Error
Tray resupply traverse zero-return error
-----
441635 Tray Feeder Zeroing Error
A pallet flew-out was detected at the pallet discharge spout. [B6217]
-----
441636 Tray Feeder Zeroing Error
The shutter opening operation on the pallet discharge spout was not completed
on time. [Y6238]
-----
6.5 Tray Feeder 2
1005-001
76
SOM-2080
Erroe ID Error Name, Description, Cause, and Remedy
441637 Tray Feeder Zeroing Error
The pallet was not detected at the tray resupply traverse. Open the resupply
cover and check the pallet conditions.
-----
441638 Tray Feeder Zeroing Error
The tray resupply traverse has a history of drawing but the detection is
impossible. [B6215]
The drawing history was cleared. Perform the zeroing operation again.
441639 Tray Feeder Zeroing Error
The tray resupply traverse has no history of drawing but a pallet was detected.
[B6215]
Remove the pallet and perform the zeroing operation again.
44163a Tray Feeder Zeroing Error
Tray resupply door power lock OPEN
-----
44163b Tray Feeder Zeroing Error
The rack shutter on the lower magazine operator side could not be opened on
time. [B6221]
-----
44163c Tray Feeder Zeroing Error
The rack shutter on the upper magazine operator side could not be opened on
time. [B6223]
-----
44163d Tray Feeder Zeroing Error
The rack shutter on the lower magazine operator side could not be closed on
time. [B6221]
-----
44163e Tray Feeder Zeroing Error
The rack shutter on the upper magazine operator side could not be closed on
time. [B6223]
-----
44163f Tray Feeder Zeroing Error
Tray resupply traverse pallet chuck unclamped error
-----
441801 Tray Feeder in advance check error
Tray power supply unturning on(power supply cut off from main machine)
-----
441802 Tray Feeder in advance check error
Main machine safety cover OPEN
-----
441803 Tray Feeder in advance check error
Tray maintenance cover OPEN
-----
6.5 Tray Feeder 2
1005-001