TR7600 SIII_Hardware_en_v_2_0_4.pdf - 第50页

Test Research, Inc . 40 TR7600 SIII Series Us er Guide – Ha rdware Figure 36: MR-J3 LED D ispla ys Alarm Cod es/MODE The meanings of error codes:

Test Research, Inc.

TR7600 SIII Series User Guide – Hardware 39

6.2 Movement along Y, Z, V and W Axes Error

The hardware error from the movement along Y, Z, V and W axes is indicated on the motor

driver LED display as shown below. Press the Mode button to toggle the display if necessary.

In case of any hardware error, see the Alarm code in the reference table below for

troubleshooting.

If no error code is shown on the LED display, but the movement along Y, Z, V and W axes is

still not functioning properly, please contact TRI FAE for further assistance.

6.2.1 C

HECK THE

MR-J3

ERROR CODE

Open the cover up and check the error code. (In normal situation it shows [AL --]).

Figure 35: MR-J3 LED Displays Alarm Codes

If it does not display the [AL --] screen, press [MODE] button to exchange the display.

Test Research, Inc.

40 TR7600 SIII Series User Guide – Hardware

Figure 36: MR-J3 LED Displays Alarm Codes/MODE

The meanings of error codes:

Test Research, Inc.

TR7600 SIII Series User Guide – Hardware 41