manual-ale-automatic-feed-soldering-control-unit-jbc-0033469_ID-245046_EN.pdf - 第9页
EAR TH FUSE F1.25 A USE ONL Y WITH A 250 V FUSE EAR TH FUSE F1.25 A EAR TH FUSE F1.25 A USE ONL Y WITH A 250 V FUSE EAR TH FUSE F1.25 A Lan gu ag e F eeder se ngs St a on se ngs T oo l se n gs Coun t er s R ese t Ti…
EARTH FUSE F1.25 A
USE ONLY WITH A 250 V FUSE
EARTH FUSE F1.25 A
EARTH FUSE F1.25 A
USE ONLY WITH A 250 V FUSE
EARTH FUSE F1.25 A
EARTH FUSE F1.25 A
USE ONLY WITH A 250 V FUSE
EARTH FUSE F1.25 A
EARTH FUSE F1.25 A
USE ONLY WITH A 250 V FUSE
EARTH FUSE F1.25 A
4
3
1
4
2
3
5
5
8
Assemble the solder reel in such a way - when viewed from above - that the solder wire unwinds on
the dispensing mechanism side (4). Then pass the solder wire through the wire guidance (5).
Align the flat side of the axis (2) with the inner flat side (the one with the screw) of the reel locking (3)
and reassemble it to the axis (4).
Note: To prevent the solder reel from spinning freely or binding, before tightening the reel locking screw
gently press the reel locking down, but only enough to allow the solder reel to rotate freely, before
tightening the reel locking screw (5).
Solder Wire
Solder Wire
Unwinding Direction
Solder Wire
Guidance
Reel Locking Assembly
Reel Locking Top View
Flat Side
(Reel Locking)
To assemble the
reel locking, its
conical side (1)
must be pointing
downwards.
Reel
Locking
Conical
Side
Reel
Locking Screw
Flat Side
of the Axis
Flat Side of the
Reel Locking
EARTH FUSE F1.25 A
USE ONLY WITH A 250 V FUSE
EARTH FUSE F1.25 A
EARTH FUSE F1.25 A
USE ONLY WITH A 250 V FUSE
EARTH FUSE F1.25 A
Language
Feeder sengs
Staon sengs
Tool sengs
Counters
Reset
Tin reload process
Tin reload process
Mode
Connuous
5.0mm/s
1.00mm
On
On
Speed
Wire diameter
Feeder parameters lock
Wire clogging detecon
None
Backward
Back
Tin reload process
Forward
Backward
Place the n on the gears
and press:
Press ok to exit
Program
Connuous
Disconnuous
Mode
Back
0.5
mm/s
25%
75%
Power
Connuous
50%
19:29
Sel. Temp.
350
º
C
Ø 1.00 mm
Supplied: 0 mm
350
º
C
0.5
10.0
25%
75%
Power
Disconnuous
50%
19:29
Sel. Temp.
350
º
C
Ø 1.00 mm
350
º
C
mm/s
mm
25%
75%
Power
50%
19:29
Sel. Temp.
350
º
C
350
º
C
3
2
1
Program #1
Ø 1.00 mm
Feeder parameters lock
None
On
On
Edit program
Programs loaded
Set default programs
Backward
1.00mm
Wire diameter
Wire clogging detecon
Back
Mode
Program
Edit program
Program #1
Length
Speed
3
2
1
mm
1.0
5.0
5.0
5.0
2.0
2.0
mm/s
Edit program
Length
Speed
3
2
1
mm
None
None
None
None
2.0
2.5
mm/s
Program #4
Tin reload process
Staon sengs
Counters
Language
Reset
Tool sengs
Feeder sengs
English
Deutsch
Español
Italiano
Français
日本語
한국어
Português
Pусский
Program version
8886732
Maximum temp
400
º
C
Off
200
º
C
On
º
C
mm
Minimum temp
Sound
PIN
Temp units
Length units
Staon reset
Back
Temp adjust
0
º
C
Temp level set
Off
10min
0min
150
º
C
Sleep delay
Peripher.
Sleep temp
Hibernaon delay
Back
Plug hrs
28
Working hrs
Part
Tot
6
0
0
0
20
1
2
1
24
20
181
19
22786
118
Sleep hrs
Sleep cyc
Fed cyc
Fed mm
Hiber hrs
No tools hrs
Feeder parameters lock
20.0mm/s
None
1.00mm
12.0mm
On
On
Speed
Wire diameter
Length
Backward
Wire clogging detecon
Back
Mode
Disconnuous
Mode
Connuous
5.0mm/s
1.00mm
Off
None
Speed
Wire diameter
Feeder parameters lock
Backward
On
Wire clogging detecon
Back
325
º
C
24.0
mm/s
25%
75%
Power
Connuous
50%
Sel. temp. 325
º
C
Ø 1.00 mm
Supplied: 12 mm
1.00mm
Updang
Your staons is being updated
No
Do you want to update firmware?
Yes
Language
Feeder sengs
Staon sengs
Tool sengs
Counters
Reset
Tin reload process
Language
Feeder sengs
Staon sengs
Tool sengs
Counters
Reset
Tin reload process
Tin reload process
Mode
Connuous
5.0mm/s
1.00mm
On
On
Speed
Wire diameter
Feeder parameters lock
Wire clogging detecon
None
Backward
Back
Tin reload process
Forward
Backward
Place the n on the gears
and press:
Press ok to exit
Program
Connuous
Disconnuous
Mode
Back
0.5
mm/s
25%
75%
Power
Connuous
50%
19:29
Sel. Temp.
350
º
C
Ø 1.00 mm
Supplied: 0 mm
350
º
C
0.5
10.0
25%
75%
Power
Disconnuous
50%
19:29
Sel. Temp.
350
º
C
Ø 1.00 mm
350
º
C
mm/s
mm
25%
75%
Power
50%
19:29
Sel. Temp.
350
º
C
350
º
C
3
2
1
Program #1
Ø 1.00 mm
Feeder parameters lock
None
On
On
Edit program
Programs loaded
Set default programs
Backward
1.00mm
Wire diameter
Wire clogging detecon
Back
Mode
Program
Edit program
Program #1
Length
Speed
3
2
1
mm
1.0
5.0
5.0
5.0
2.0
2.0
mm/s
Edit program
Length
Speed
3
2
1
mm
None
None
None
None
2.0
2.5
mm/s
Program #4
Tin reload process
Staon sengs
Counters
Language
Reset
Tool sengs
Feeder sengs
English
Deutsch
Español
Italiano
Français
日本語
한국어
Português
Pусский
Program version
8886732
Maximum temp
400
º
C
Off
200
º
C
On
º
C
mm
Minimum temp
Sound
PIN
Temp units
Length units
Staon reset
Back
Temp adjust
0
º
C
Temp level set
Off
10min
0min
150
º
C
Sleep delay
Peripher.
Sleep temp
Hibernaon delay
Back
Plug hrs
28
Working hrs
Part
Tot
6
0
0
0
20
1
2
1
24
20
181
19
22786
118
Sleep hrs
Sleep cyc
Fed cyc
Fed mm
Hiber hrs
No tools hrs
Feeder parameters lock
20.0mm/s
None
1.00mm
12.0mm
On
On
Speed
Wire diameter
Length
Backward
Wire clogging detecon
Back
Mode
Disconnuous
Mode
Connuous
5.0mm/s
1.00mm
Off
None
Speed
Wire diameter
Feeder parameters lock
Backward
On
Wire clogging detecon
Back
325
º
C
24.0
mm/s
25%
75%
Power
Connuous
50%
Sel. temp. 325
º
C
Ø 1.00 mm
Supplied: 12 mm
1.00mm
Updang
Your staons is being updated
No
Do you want to update firmware?
Yes
Language
Feeder sengs
Staon sengs
Tool sengs
Counters
Reset
Tin reload process
Language
Feeder sengs
Staon sengs
Tool sengs
Counters
Reset
Tin reload process
Tin reload process
Mode
Connuous
5.0mm/s
1.00mm
On
On
Speed
Wire diameter
Feeder parameters lock
Wire clogging detecon
None
Backward
Back
Tin reload process
Forward
Backward
Place the n on the gears
and press:
Press ok to exit
Program
Connuous
Disconnuous
Mode
Back
0.5
mm/s
25%
75%
Power
Connuous
50%
19:29
Sel. Temp.
350
º
C
Ø 1.00 mm
Supplied: 0 mm
350
º
C
0.5
10.0
25%
75%
Power
Disconnuous
50%
19:29
Sel. Temp.
350
º
C
Ø 1.00 mm
350
º
C
mm/s
mm
25%
75%
Power
50%
19:29
Sel. Temp.
350
º
C
350
º
C
3
2
1
Program #1
Ø 1.00 mm
Feeder parameters lock
None
On
On
Edit program
Programs loaded
Set default programs
Backward
1.00mm
Wire diameter
Wire clogging detecon
Back
Mode
Program
Edit program
Program #1
Length
Speed
3
2
1
mm
1.0
5.0
5.0
5.0
2.0
2.0
mm/s
Edit program
Length
Speed
3
2
1
mm
None
None
None
None
2.0
2.5
mm/s
Program #4
Tin reload process
Staon sengs
Counters
Language
Reset
Tool sengs
Feeder sengs
English
Deutsch
Español
Italiano
Français
日本語
한국어
Português
Pусский
Program version
8886732
Maximum temp
400
º
C
Off
200
º
C
On
º
C
mm
Minimum temp
Sound
PIN
Temp units
Length units
Staon reset
Back
Temp adjust
0
º
C
Temp level set
Off
10min
0min
150
º
C
Sleep delay
Peripher.
Sleep temp
Hibernaon delay
Back
Plug hrs
28
Working hrs
Part
Tot
6
0
0
0
20
1
2
1
24
20
181
19
22786
118
Sleep hrs
Sleep cyc
Fed cyc
Fed mm
Hiber hrs
No tools hrs
Feeder parameters lock
20.0mm/s
None
1.00mm
12.0mm
On
On
Speed
Wire diameter
Length
Backward
Wire clogging detecon
Back
Mode
Disconnuous
Mode
Connuous
5.0mm/s
1.00mm
Off
None
Speed
Wire diameter
Feeder parameters lock
Backward
On
Wire clogging detecon
Back
325
º
C
24.0
mm/s
25%
75%
Power
Connuous
50%
Sel. temp. 325
º
C
Ø 1.00 mm
Supplied: 12 mm
1.00mm
Updang
Your staons is being updated
No
Do you want to update firmware?
Yes
Language
Feeder sengs
Staon sengs
Tool sengs
Counters
Reset
Tin reload process
1
2
Inlet
Nozzle
Wire
Guidance
Solder Wire Loading
Pass the solder wire through the wire guidance
and introduce the solder wire into the inlet nozzle
(1) until it reaches the wheels (2).
Make sure the wire passes through the
intermediate nozzle (3) and enters the guide
tube (4).
Guide
Tube
Wheels
Intermediate
Nozzle
4 3
Acces to Main Menu by pressing , select “Feeder settings” (1) and then “Wire diameter” (2) to
adjust the value to the current solder wire diameter.
1
2
Select “Tin reload process” and then use to
feed the solder wire and advance until it comes
out of the outlet nozzle.
If needed, carefully push the wire until it gets
locked in between the rotating wheels for the
wire to start moving forward. Keep pressed
and after a while, the wire will advance faster.
Main Menu Screen
Wire
9
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm
130 mm
para manuales - negro plano
200 mm
300 mm
2
1
Dragging Buttons
Outlet Nozzle
Forward the solder wire pushing any of the two dragging buttons (1) until the wire comes out of the
outlet nozzle (2).
More convenient handling thanks to its two dragging buttons
The component layout or application angle may require working in different positions. Having one button
on each side of the tool increases adaptability and makes it easier to reach diffi cult solder joints without
compromising user comfort.
Solder Wire Feeding
Alternatively, solder wire can also be fed using
pedal P405. The pedal should be plugged in at
the rear of the feeder control unit into the pedal
connector.
EARTH FUSE F1.25 A
USE ONLY WITH A 250 V FUSE
EARTH FUSE F1.25 A
EARTH FUSE F1.25 A
USE ONLY WITH A 250 V FUSE
EARTH FUSE F1.25 A
Inlet Nozzle
Wire Guidance
1
Solder Wire
Wire Winding Direction
Solder Wire Unloading
With Solder Wire Perforation
To unload solder wire with perforation that has already passed through the guide tube, cut the wire
between the wire guidance and the inlet nozzle (1).
To extract the wire out of the tube, hold the tool on your hand and press until the wire stops
moving forward.
Grasp the wire coming out of the outlet nozzle with a pliers and pull from it until it is completely out.
Without Solder Wire Perforation
When using a kit without solder wire perforation, press until the wire is completely wound to
unload the solder wire. It is best to rotate the reel by hand as the wire is being pulled back in order
to keep it neatly arranged on the reel.
Or, If preferred, proceed as described before for perforated solder wire unloading.
10