00197382-03_IM_SetupCenter6.3SP2_EN.pdf - 第82页

Barcode-Scanner Installation Motorola Scanner 6.3.5 Motorola / Symbol Scanner Configuration 82 Installation Manual SIPLACE Setup Center 6.3 SP2

Barcode-Scanner Installation

6.3.5 Motorola / Symbol Scanner Configuration Motorola Scanner

Installation Manual SIPLACE Setup Center 6.3 SP2 81

► Select the barcode and press Edit to open the additional barcode settings.

► Press Ok to save the settings.

NOTICE

Context menu

Click and hold on a barcode to open the context menu:

All Off: Select none of the barcodes in the list

All On: Select all the barcodes in the list

Barcode-Scanner Installation

Motorola Scanner 6.3.5 Motorola / Symbol Scanner Configuration

82 Installation Manual SIPLACE Setup Center 6.3 SP2

Docking Station Installation

7.2.1 CAN Bus Address of the Docking Station Safety Instructions

Installation Manual SIPLACE Setup Center 6.3 SP2 83

7 Docking Station Installation

Docking Station Installation

To obtain more details about using the docking station for X-Series and SX-Series tables, please refer

to the current version of the operating manual.

7.1

7.1 Safety Instructions

Safety Instructions

7.2

7.2 Connections on the Docking Station

Connections on the Docking Station

7.2.1

7.2.1 CAN Bus Address of the Docking Station

CAN Bus Address of the Docking Station

You need to set a CAN Bus address for each docking station. This CAN Bus address must be different

for each docking station.

► Set the CAN Bus address for the docking station.

Docking station: CAN bus addresses

► Make sure that you only assign each address once, when setting the CAN Bus address.

DANGER

Make sure that nobody is using the connected change over table, when you switch the power

on.

The device must not be opened or tampered with.

WARNING

Do not connect the device during placement or when installed inside the placement machine.

DANGER

Never cover the air discharge opening in the integrated fan and the ventilation slits on the side

of the device!

Covering these could lead to overheating and destruction of the power pack.