cab_products_electronic_industry.pdf - 第5页

4 1 3 2 5 2 1 ,5 27 3...30 1...23 0...40 41 34 1 0 ° 1 0 ° 3 0° 0,8 - 3,2 max. 0,8 min. 0,25 PCB separator MAESTR O 3E The MAESTRO 3E sep arates both small and larg e PCBs. The support table and the rest can be set conti…

47,5

21,535

10°

43 41

34 34

30°

0,8 - 3,2

max. 0,8

min. 0,25

3 1 2 6 4 5

PCB separators MAESTRO 2, 2M

Component height

Outside dimensions increased

aer separation: typically 0.2 mm

The milled groove

may be interrupted by cutouts

to a length of up to 5 mm.

Part no. Product

8933900

8933935

PCB separator MAESTRO 2

PCB separator MAESTRO 2M

Scope

of delivery

PCB separator

Power cable Type E+F, length 1.8 m

(MAESTRO 2M only)

Allen key 2 mm

Operator's manual DE/EN

Pos. Part no. Wear parts

8930509.001

8930522.001

8930744.001

8933661.001

8930514.001

8930745.001

Circular blade FR4

Holder

Upper blade protection

Lower circular blade

Guide

Lower blade protection

Technical data MAESTRO 2 MAESTRO 2M

Separation method Component side Circular blade

Solder side Circular blade

Operation

manual motor-driven

Separation speed - 100, 200, 300 mm/s

Separation length 15 - 300 mm

Material

FR4

Component height

Solder/component side up to 34 mm

Power supply

- 230/115 VAC, 50/60 Hz

Temperature / Operation + 10 - 35°C / 10 - 85 %

humidity Stock 0 - 60°C / 20 - 80 %

not condensing

Transpor t – 25 - 60°C / 20 - 80 %

Width x Height x Depth 195 x 330 x 620 mm

Weight

16 kg 19 kg

Approvals CE, FCC Class A

The compact MAESTRO 2 separates PCBs quickly and economically.

Little footprint is required.

MAESTRO 2

is the aordable entry-level device to handle smaller demands.

PCBs are fed between the circular blades manually to be separated.

MAESTRO 2M, motor-driven

to separate large numbers of PCBs without tiring. The lower circular

blade is motor-driven. The PCB is fed, seized by the circular blade,

transported and separated. The device especially ts with highly

dense assembly or slim margin strips. Three speeds can be selected.

Safe operation

The distance between the holder

and the guide

is set so the PCB can be fed only in the milled groove.

1 32

21,527

3...30

1...23

0...40 41

10°

30°

0,8 - 3,2

max. 0,8

min. 0,25

PCB separator MAESTRO 3E

The MAESTRO 3E separates both small and large PCBs.

The support table and the rest can be set continuously

to the best possible operational position.

By adjusting the distance between the linear blade and the rest,

margin strips can fall through and are sorted out.

Safe operation

A PCB is positioned with its milled groove onto the linear blade

and the circular blade is moved manually through the PCB.

The distance between the holder and the linear blade

is set so the PCB can be separated only in the milled groove.

Component height

Outside dimensions increased

aer separation: typically 0.2 mm

The milled groove

may be interrupted by cutouts.

Protruding components

need a recessed linear blade.

Technical data

Separation method Component side Circular blade

Solder side Linear blade

Operation manual

Separation length up to 450 mm

Material FR4

Component height Component side up to 34 mm

Solder side

up to 23 mm

Temperature / Operation + 10 - 35°C / 10 - 85 %

humidity Stock 0 - 60°C / 20 - 80 %

not condensing Transport – 25 - 60°C / 20 - 80 %

Width x Height x Depth 350 x 455 x 700 mm

Weight 22 kg

Approvals CE, FCC Class A

Part no. Product

8933945 PCB separator MAESTRO 3E/450

Scope

of delivery

PCB separator

Allen key 2 mm

Operator's manual DE/EN

Pos. Part no. Wear parts

8930509.001

8936615.001

8936614.001

8933394.001

Circular blade FR4

Blade protection

Linear blade 450

312 4

PCB separator MAESTRO 4S

MAESTRO 4S separates both small and large PCBs

quickly and economically without stress.

Key features:

- Blade distance to be entered on the operation panel

is set motor-driven.

- Up to nine programs to be stored

- Separation length to be continuously adjusted via limit switches

- In terms of a preventive blade maintenance,

the cutting performance is displayed.

By traversing the milled groove once, tensile and compressive

stresses can cause damage to sensitive components located close

to the groove. A second traverse and simultaneous readjustment

of the blade distance already reduces stresses considerably.

The quality of the assembled PCBs improves signicantly.

Technical data 4S/450 4S/600

Separation method Component side Circular blade

Solder side Linear blade

Operation path-optimized, motor-driven

Separation speed 300, 500 mm/s, to be switched

Materials FR4, aluminum

Component height Component/solder side up to 34 mm

Separation length up to 450 mm up to 600 mm

Support table depth 200 mm

Programming

Start Traverse to initial position

Programs 9

Separation steps 1 - 5

Blade distance 0.9 - 0.05 mm

Key button Unlock program selection

Performance display up to 99 km

DEL Step reset

Power switch ON/OFF

Foot switch START separation

Safety switch E-stop

Power supply 100 - 240 VAC, 50/60 Hz

Emmission

sound pressure level

LpA < 70 dB (A)

Temperature / Operation

+ 10 - 35°C / 10 - 85 %

humidity Stock

0 - 60°C / 20 - 80 %

not condensing

T r a n s p o r t

– 25 - 60°C / 20 - 80 %

Width x Height x Depth 702 x 434 x 425 mm 852 x 434 x 425 mm

Weight 38 kg 46 kg

Approvals CE, FCC Class A

Pos. Part no. Wear parts

8930509.001

8936615.001

8936614.001

8933394.001

8933682.001

Circular blade

Blade protection

Linear blade 450

Linear blade 600

Part no. Product

8936800

8936800.520

8936745

8936745.520

PCB separator MAESTRO 4S/450

PCB separator MAESTRO 4S/450/alu

PCB separator MAESTRO 4S/600

PCB separator MAESTRO 4S/600/alu

Scope

of delivery

PCB separator

Power cable Type E+F, length 1.8 m

Foot switch

Allen key 2 mm

Support table including assembly kit

Dial gauge

Operator's manual DE/EN

Dial gauge

In order to separate without

stress and to achieve a long

service life, the circular and

linear blades have to be guided

along the entire separation.

The dial gauge setting and regu-

larly checking the parallelism

is assembled to the carriage.

Material: FR4 1.5 mm

Residual thickness approx. 0.6 mm

cut 1 cut 2

single cut

µm/m

200

150

100

- 50

- 100