EUKYX-199-5100_G5S2_Instruction_Vol5_E.pdf - 第38页
Safety Precautions EUKYX-Safety 199-X100 Safe-30 No. Al er t L ab el s an d De sc rip ti on (20) Description ● Be sur e to rea d the i nst ruc t ion ma nua l ca refu lly fo r co rre c t op era ti ons b efor e use. If t h…
Safety Precautions
EUKYX-Safety
199-X100
Safe-29
No. Alert Labels and Description
(17)
10-0252-
The machine will be break down.
Trained Personnel Only!
Description
●
If you put your hand or a heavy object on the backup table while working inside the machine, the
backup table may become deformed due to an excessive load.
(18)
10-0333-
Never disconnect the connector during
the feeder base lifting operation.
Doing so might cause a system malfunction.
Description
●
Do not disconnect the connector during the feeder base moving-up operation. Doing so might
cause a malfunction of the system.
(19)
10-0335-
Keep Linear Guide Grooves
Clear of Any Object!
An object in the groove may be trapped in the
moving part, causing the machine to be damaged.
Description
●
Keep the linear guide grooves clear of any object. Otherwise, an object in the groove may be
trapped in the moving part, causing the machine to be damaged.
5. Alert Labels
Safety Precautions
EUKYX-Safety
199-X100
Safe-30
No. Alert Labels and Description
(20)
Description
●
Be sure to read the instruction manual carefully for correct operations before use. If the machine
is operated incorrectly, it might cause a breakdown of the machine.
(21)
Do not touch your hand
onto the head block.
10-0330-
Description
●
Do not put your hand on the head block.
If significant force is applied to the head block, it might be deformed.
(22)
10-0314-
Push here when performing maintenance.
Description
●
Do not put your hand on the reference mark block.
When a strong force is applied to the reference mark block, it might be deformed.
5. Alert Labels
Safety Precautions
EUKYX-Safety
199-X100
Safe-31
6. Precautionary Items for Correct Operations
Requirements for Installation
Be sure to fulfill the following requirements for safety purposes.
• Overvoltage Category : Category III
• Pollution Degree : 2
• Altitude : 1,000 m or less above the sea level
►
Overvoltage Categories refer to the level of Impulse Withstand Voltage protection
provided at the specified Pollution Degree.
Category III : Primary circuits of a device to which power is directly supplied from the
power distribution panel, and circuits from the distribution panel to outlets.
The term was changed from "Installation Category" to "Overvoltage Category".
►
"Pollution Degree" is a degree of pollution severity.
Pollution Degree 2 : This equipment is used under the environment where nonconductive
pollution occurs, which may become conductive temporarily due to
occasional condensation.
►
Altitude means the height above sea level of the place where the machine is to be used.
When the machine is used in a place that has an altitude of 1,000 meters or more, contact
YAMAHA sales representatives.
Note
Note
6. Precautionary Items for Correct Operations