OCP-02502-G.pdf - 第3页
VITRONICS REFLOW SOLDERING SYSTEMS EM 02502- G 15-Nov-00 (c) PAGE Operator’s Manual 3 WHAT IS AN OPERATOR ALLOWED TO DO ?? An Operator is allowed to: 1) Start the Oven running existing Product Definitions. 2) Stop Oven. …
VITRONICS REFLOW SOLDERING SYSTEMS
EM 02502-G 15-Nov-00 (c) PAGE Operator’s Manual
2
THIS MANUAL APPLIES TO
VERSION 07.XX.00.XX
OF THE VITRONICS OVEN CONTROL SOFTWARE
for Windows™
OPERATOR’S MANUAL
READ THIS FIRST !!!!!
The Vitronics Reflow Oven is used in the manufacturing of printed circuit boards (PCBs).
It is an electric high temperature oven capable of temperatures as high as 350° C.
It has several “zones” between the beginning (onload end) to the end (offload end).
Each zone can be set at a different temperature than its neighboring zones.
Usually the last 1, 2, 3, or 4 zones are “Cooling Zones” to help cool the printed circuit
boards after they have been processed. (PCBs coming out of the oven are too hot to
touch with the bare hands !!!)
The ability to select the temperature(s), and select the speed of the conveyor, allows
printed circuit boards to be exposed to varying temperatures as it passes though the oven
on the motorized conveyor.
The overall operation and control of the Reflow Process is a precision procedure requiring
a sophisticated Electrical Control System and Oven Control Program. The Vitronics Oven
Control Program runs on a standard IBM PC computer system which also stores and
displays oven information.
Control and measurement is performed by a controller mounted on the oven electrical
panel. The Vitronics Control Program sends information to the oven mounted controller,
and requests process information back. If communications is interrupted for more than 10
seconds, the oven mounted controller puts the oven into a safe state and the Vitronics
Control Program will display an alarm.
The OPERATOR controls the oven with the computer keyboard and trackball.
Various selections determine the functions to be performed by the Vitronics Oven
Control Program, oven mounted controller, and the oven.
This Manual describes what an OPERATOR needs to know about using the
Vitronics Control Program to successfully operate the Vitronics Reflow Oven.
VITRONICS REFLOW SOLDERING SYSTEMS
EM 02502-G 15-Nov-00 (c) PAGE Operator’s Manual
3
WHAT IS AN OPERATOR ALLOWED TO DO ??
An Operator is allowed to:
1) Start the Oven running existing Product Definitions.
2) Stop Oven.
3) Adjust rail width (where applicable).
4) View message log.
5) View data log.
6) Other Items listed in Table of Contents
THIS MANUAL IS WRITTEN TO INCLUDE THOSE OVEN FUNCTIONS WHICH
ARE ACCESSIBLE TO THE OPERATOR AS THE OVEN IS SHIPPED BY THE
MANUFACTURER
THE “SYSTEM” SUPERVISOR OR OTHERS AT YOUR FACILITY MAY
CHANGE THE PASSWORD REQUIREMENTS AND ACCESSIBILITY TO
SOME FUNCTIONS,
THIS MANUAL DOES NOT COVER ANY CHANGES MADE AFTER
THE OVEN IS MANUFACTURED !!!
VITRONICS REFLOW SOLDERING SYSTEMS
EM 02502-G 15-Nov-00 (c) PAGE Operator’s Manual
4
AUTHORIZED VITRONICS / SOLTEC SERVICE FACILITIES
The Vitronics- Soltec service sites are:
Europe
VITRONICS SOLTEC BV
Karolusstraat 20
4903 RJ Oosterhout
the Netherlands
tel. +31-162-483000
fax +31-162-483253
helpdesk@nl.vitronics-soltec.com
Germany
VITRONICS SOLTEC GmbH
An der Kohlerei 7
97828 Marktheidenfeld
Germany
tel. +49-9391-98820
fax +49-9391-988228
helpdesk@de.vitronics-soltec.com
Americas
VITRONICS SOLTEC Inc
2 Marin Way
Stratham, NH 03885
United States
tel. +1-603-772-7778
fax +1-603-772-9319
helpdesk@us.vitronics-soltec.com
Asia Pacific
VITRONICS SOLTEC PTE LTD.
10 Ang Mo Kio St 65
Techpoint Unit 01-05
Singapore 569059
tel. +65-484-3010
fax +65-484-1910
helpdesk@sg.vitronics-soltec.com
We can be contacted for service 24 hours a day
Please visit us at:
http://www.vitronics-soltec.com/