OCP-02502-G.pdf - 第6页
VITRONICS REFLOW SOLDERING SYSTEMS EM 02502- G 15-Nov-00 (c) PAGE Operator’s Manual 6 OVEN CONTROL PANEL PUSHBUTTON SYMBOLS NOTICE WHEN “POWER TO PROCESS” IS INTERUPTED, PARTS OF THE OVEN ARE ELECTRICALLY POWERED AND DAN…
EM 02502- 15-Nov-00 (c) Operator’s Manual
* HOW TO USE THIS MANUAL *
THIS PAGE EXPLAINS HOW THIS MANUAL
IS ORGANIZED AND PRESENTED.
PRIMARY DIVISIONS (as found in the Table of Contents)
SECONDARY DIVISIONS (as found in the Table of Contents)
In the text throughout this manual you will find the following practice:
QUICK COOL DOWN is an option, title, or software selection and will be shown in
bold capitals.
ENTER is a keyboard key and will be shown in bold capitals.
VERY IMPORTANT INFORMATION IS SHOWN:
1) Bold
2) CAPITALIZED
3) IN ITALICS
4) Underlined
5) WITH A SHADED BACKGROUND
6) WITH A BOX AROUND IT
7) OR SOME COMBINATION OF 1 - 6 ABOVE
VITRONICS REFLOW SOLDERING SYSTEMS
EM 02502-G 15-Nov-00 (c) PAGE Operator’s Manual
6
OVEN CONTROL PANEL PUSHBUTTON SYMBOLS
NOTICE
WHEN “POWER TO PROCESS” IS INTERUPTED, PARTS OF THE OVEN ARE
ELECTRICALLY POWERED AND DANGEREROUS TO PERSONNEL !!!
Information is presented here only to explain the graphic symbols on the
“Oven Control Panels”, NOT to instruct on the Operation of the Oven.
Refer To The Appropriate Equipment Manual(s) For Proper Oven Operation
OFF-LOAD CONTROL PANEL
Attention
Some Oven Models may have differently shaped Control Panels
and may not have ALL the functions shown here.
The meaning of the symbols explained here are the same.
THERMOCOUPLE
INPUTS FOR OVEN
PROFILING
SELECTOR SWITCH
RAISES AND LOWERS
THE OVEN HOOD
SELECTOR SWITCH
ADJUSTS RAIL
and
CENTER BOARD SUPPORT
IN or OUT
EMERGENCY STOP
BUTTON (E-STOP)
INTERRUPTS POWER
TO PROCESS
VITRONICS REFLOW SOLDERING SYSTEMS
EM 02502-G 15-Nov-00 (c) PAGE Operator’s Manual
7
DEFINITIONS
The following terms are defined as:
Cell: A heating (or cooling) unit which is in the upper or lower half of a zone on many ovens.
E.g.: Upper heat cell, lower cool cell, etc.
Click On: The action of placing the tip of the pointer over a selection and pressing the appropriate trackball
switch.
Control System: The combination of electrical, mechanical, computer and software systems required to
operate the oven.
Dialog Box: A small window on the screen where information is viewed ( or entered ) into the program.
Icon: A graphical representation (Symbol) of an item, operation, or function, some icons can be selected
with the pointer.
Menu:
8 titles at the top of the screen, which can be “pulled down” with the left trackball (or mouse) button,
-- each will display additional option selections.
Pointer: A small arrowhead on the screen, controlled by the keyboard trackball.
Right Click: To select an item or function and press the right switch on the mouse or trackball
Select: To click on a menu item. This selects the function labeled or shown on the button.
Trackball: The ball on the keyboard used to move the pointer. Rotating the trackball moves the pointer in
the direction of rotation.
Trackball Button: Buttons associated with the trackball. Check the keyboard manufacturer's manual to
identify the button positions and functions.
Tunnel: The section of the oven where product is processed.
Window: A framed rectangular area of the screen containing text and/or graphical information. (for display
purposes…not for operator input
Zone: One section of the tunnel which contains a blank cell, baffle cell, heat cell or cooling cell. Except on
the IsoTherm Reflow Oven, a zone usually has an upper and a lower part.