TM4230.SmartRecognition.pdf - 第10页
S M T S o f t w a r e E n g i n e e r i n g G r o u p I M O p e r a t i o n s Y A M A H A M O T O R C O . , L T D . MDOC-SOFT50185 ④ Edge Threshold （ Slid e bar button ） Allows you to change the e dg e th…
SMTSoftwareEngineeringGroup
IMOperationsYAMAHAMOTORCO.,LTD.
MDOC-SOFT50185
6) Adjust detected edges
Adjust the number of edges that are detected automatically.
100 to 999 edges can be set, but the more edges it has, the more time the recognition
process will take. Therefore 100 to 499 edges are recommended.
Change edge threshold
If the edges are too many or few, modify the edge threshold to
decrease or increase the number.
Compress edge If the edges are too many, thin out some edges.
Erase edge manually Erase false detection as parts edges if any.
Or erase edges that are not necessary for model creation.
① Edge Num
The number of current edges.
If the number is not appropriate, the background color will turn to the warning
condition as below.
100 to 499 : Grey (appropriate)
500 to 999 : Yellow (acceptable but takes time)
0 to 49 or over 1000 : Red (error at switching the screen)
② Edge Threshold（Edit box）
Allows you to change the edge threshold value inputting value here.
③ Edge Threshold（Slide bar）
Allows you to change the edge threshold value dragging the slide bar.
①
①①
①
②
②②
②
③
③③
③
④
④④
④
④
④④
④
⑤
⑤⑤
⑤
⑥
⑥⑥
⑥
⑦
⑦⑦
⑦
⑧
⑧⑧
⑧
⑨
⑨⑨
⑨
⑩
⑩⑩
⑩
⑪
⑪⑪
⑪
SMTSoftwareEngineeringGroup
IMOperationsYAMAHAMOTORCO.,LTD.
MDOC-SOFT50185
④ Edge Threshold（Slide bar button）
Allows you to change the edge threshold value ±1 by one-click.
⑤ Manual Compress
When [Manual] is checked, [⑥Manual Compress Level] is enabled.
⑥ Manual Compress Level
Allows you to select a manual compressing level.
You can select a level from 1/1 to 1/10.
Compressing level decided automatically is displayed here in gray.
⑦ Erase edge manually
When [Erase edge manually] is checked, ⑧ to ⑪ are enabled.
⑧ Erase Edge（Point）
Allows you to change how to erase edges to the Point mode.
The mouse cursor on the vision window turns to an eraser, and you can erase
any edge as you like by dragging the mouse.
⑨ Erase Edge（Rectangle）
Allows you to change how to erase edges to the Rectangle mode.
You can select an area by dragging the mouse, and erase edges in the area at
once.
⑩ Erase Edge（Undo）
Restores erased edges to the previous status.
If the edges have been erased in the point mode, they are not restored
point-by-point, but restored by each dragging mouse action.
⑪ Erase Edge（Undo All）
Restores all erased edges to the original status.
※ [Attention] Please note that the edge condition will be initialized, if you go back to the
[Get Image] screen from the [Create Model] screen
※ [Attention] Please note that the edge condition will be initialized, if you execute Manual
Compress after erasing edges.
SMTSoftwareEngineeringGroup
IMOperationsYAMAHAMOTORCO.,LTD.
MDOC-SOFT50185
7) Set the center of the parts.
When you go to the [Create Model] screen and parts edges are detected, the edges
are surrounded with a circumscribed square frame of green dots line, and its center is
automatically detected.
However, if you executed [6] Adjust detected edges, the circumscribed frame may
have been changed as well. In that case, you need to set the center again.
To set the center, press the [Centering] button. Also you can set it manually.
① Auto centering
Automatically detects the center of the circumscribed frame on the vision window.
Circumscribed frame : Square surrounding the point of max and min XY
where edges exist.
Center Position : The vertex of divided circumscribed frame in half.
② Manual centering （Select how to move）
Start : Changes to the mode, in which the center of the circumscribed frame is
resized with its lower right portion fixed.
End : Changes to the mode, in which the center of the circumscribed frame is
resized with its upper left portion fixed.
Move : Changes to the mode, in which the whole of the center of the
circumscribed frame is moved.
After you select a mode, press the ④ button to move the frame to the specified
position.
③ Manual centering （Select moving range）
Allows you to select a moving range by one-click of [④Manual centering(Move)] to
resize or move the circumscribed frame.
④ Manual centering（Move）
Resizes or moves the circumscribed frame. It works in the mode you select in [②
Manual（Select how to move）] and [③Manual（Select moving range）].
①
①①
①
②
②②
②
③
③③
③
④
④④
④