TM4230.SmartRecognition.pdf - 第15页
S M T S o f t w a r e E n g i n e e r i n g G r o u p I M O p e r a t i o n s Y A M A H A M O T O R C O . , L T D . MDOC-SOFT50185 4.3. Error Message Error Message Number T itle Cause and Countermeasu re E…
SMTSoftwareEngineeringGroup
IMOperationsYAMAHAMOTORCO.,LTD.
MDOC-SOFT50185
11) Save Model
Press the [OK] button to save the created model data.
※[Caution] When you press the [OK] button, you go back to the [Parts Adjust] screen,
with the model data still kept in the parts adjust data.
However, please note that if you press the [Cancel] button on the [Parts Adjust]
screen, the model data will be deleted.
SMTSoftwareEngineeringGroup
IMOperationsYAMAHAMOTORCO.,LTD.
MDOC-SOFT50185
4.3. Error Message
Error Message
Number Title Cause and Countermeasure
Ea2755
SMART RECOGNITION
DATA READ ERROR
Failed to read Smart Recognition Data.
[Cause]
Model data is invalid.
No model doesn’t exist.
[Countermeasure]
Check if you have finished to create model data
for Smart Recognition.
Ea7712 INITIALIZATION ERROR
It failed to initialize vision system.
[Cause]
The machine doesn’t have valid system
board.(With 1GB or more size RAM)
[Countermeasure]
1. Change [Setting] - [Installation] -
[Smart Recognition] to [Not Use].
2. Change to valid system board.
Ea12815 Smart Recognition Error
Result from checking detected edges,
this parts is not applicable for Smart
Recognition.
Check the following items, and get image
again.
[Cause]
The number of detected edges is too small.
[Countermeasure]
1. Select detected area to enclose whole parts.
2. Change the light setting.
- Light type
- Light level
SMTSoftwareEngineeringGroup
IMOperationsYAMAHAMOTORCO.,LTD.
MDOC-SOFT50185
Ea12816 Smart Recognition Error
Result from checking detected edges,
no edges can be detected.
Check the following items, and get image
again.
[Cause]
The number of detected edges is 0.
[Countermeasure]
1. Pick up the parts at center of the nozzle.
2. Change the light setting.
- Kind of light
- Light level
Ea12817 Smart Recognition Error
Result from checking detected edges,
the work area for detecting edges is over flow.
Check the following items, and get image
again.
[Cause]
The area for detecting edges is too large.
[Countermeasure]
If the area for detecting edges is too large,
select minimum area for enclosing whole parts.
Ea12818 Smart Recognition Error
The number of edges is illegal.
Check the following items.
[Cause]
The number of edges is as below.
0 - 99
1000 -
[Countermeasure]
Adjust the number of edges to 100 – 999 as
follows.
In case of 0 - 99
1. Undo to erased edges.
2. Down edge threshold.
3. Down compress level.
In case of 1000 -
1. Erase the unnecessary edges.
2. Up edge threshold.
3. Up compress level.