00195987-03_VB_SWS_Software_3.0_DE_EN.pdf - 第37页
SIPLACE SWS Software 3. 0 / Versionsbeschreibung / Ve rsion Description Ausgabe 12/2014 Edition 37
SIPLACE SWS Software 3.0 /
Versionsbeschreibung / Version Description Ausgabe 12/2014 Edition
36
15.2 When Deleting a Magazine Type, No Check Whether
Magazine is still Assigned to Products.
When a magazine type is deleted, no check is performed to see whether the magazine type was
still assigned to products. If products are loaded at a later time, although their magazines no longer
exist, you will be unable to initialize the SWS. You will be unable to load any other products or
assign a valid magazine type to the current product.
Solution:
Terminal open (ctrl + alt + x) and log in as launch
Edit file /asm/wf/config/process/machine.dat:
kwrite /asm/wf/config/process/machine.dat
The following window will be shown:
Enter the name of a valid product as the value [/process/mac/actProductName]. (e.g. value
= "testProduct").
Saver the file and close kwrite.
Terminate the SWS software:
killall machine gui gembox
Restart the SWS software
ctrl + alt + q
SIPLACE SWS Software 3.0 /
Versionsbeschreibung / Version Description Ausgabe 12/2014 Edition
37
SIPLACE SWS Software 3.0 /
Versionsbeschreibung / Version Description Ausgabe 12/2014 Edition
38
16 List of Relevant Terms and Abbreviations
ACT
Accuracy Check Tool
CO
Component
PA
Processing area
CA4
Machine type is Chip Assembly (CA) series with 4 gantries
CA4 eWLP
Machine type is Chip Assembly (CA) series with 4 gantries and
WLFO (customer project, no series release)
C&P
Collect & Place
CPP
Collect & Place & Pick & Place
DX1/DX2
Machine type with 1 or 2 gantries
DX4
Machine type with 4 gantries
DC
Dual Conveyor
EDIF
Electronic Design Interchange Format
SC
Single Conveyor
eWLP
embedded Wafer Level Process
FCCS
Field Camera Calibration System
GCU
Gantry Control Unit (new electronics concept for X4i)
GUI
Graphical User Interface
HCU
Head Control Unit (new electronics concept for X4i)
HFH
High Force Head
HW
Hardware
PCB
Printed Circuit Board
F
Feature
MTC
Matrix Tray Changer
OIS
Operator Information System
QC
Quad Lane Conveyor
NC
Nozzle changer
SC
SIPLACE Setup Center (external setup area)
SSI
SIPLACE Station Interface
SW
Software
SWS
SIPLACE Wafer System
SX1/SX2
Machine type with 1 or 2 gantries
SX3
Machine type with 3 gantries
SX4
Machine type with 4 gantries
TH
Twin Head
Twin VHF
Very High Force Twin Head
VCU
Vision Control Unit