LA 302 Pressure Controller Manual.pdf - 第23页
Installation 3-1 P/N 71 19797A 2006 Nordson Corporation LA 302 Issued 06/06 Section 3 Installation W ARNING: Allow only qualified personnel to perform the following tasks. Observe and follow the safety instructions in th…
Description
2-6
P/N 7119797A
2006 Nordson Corporation
LA 302
Issued 06/06
Back
3
5
2 4
10
9 6
7
1
8
11
Fig. 2-3
1 Ventilation slit
2 Output for adhesive gun 1
3 Symbol for adhesive guns
4 Output for adhesive gun 2
5 Mains switch
6 Unit port
7 Encoder symbol
8 Encoder input
9 Proportional pressure control
valve output
10 Proportional pressure control
valve output
11 Pressure output symbol
Installation
3-1
P/N 7119797A
2006 Nordson Corporation
LA 302
Issued 06/06
Section 3
Installation
WARNING: Allow only qualified personnel to perform the following tasks.
Observe and follow the safety instructions in this document and all other
related documentation.
Transport
Transport the unit such as to prevent damage. Do not throw the unit. Use
suitable packing material, e.g. Styrofoam and sturdy cardboard. Refer to
Technical Data for weight.
Protect the unit from humidity, dust, jolts and vibrations.
Unpacking
Unpack the unit carefully to prevent damage. Then check for any damage
caused during shipping.
Save the packing material for later use. Otherwise reuse the material or
dispose of it properly according to local regulations.
Setup
Protect the unit from humidity, excessive dust accumulation and vibrations.
Do not block ventilation slits (1, Fig. 3-1).
Refer to Technical Data for dimensions.
Installation
3-2
P/N 7119797A
2006 Nordson Corporation
LA 302
Issued 06/06
2
1
Fig. 3-1 LA 302
1 Ventilation slit 2 Mains switch
Removal
Switch off the power supply (2). Then detach all electrical connections.
Storage
Pack the pressure controller in suitable packing material, e.g. Styrofoam
and sturdy cardboard. Protect from humidity, dust and extreme temperature
fluctuations (condensation).
Disposal
Dispose of properly according to local regulations.