LA 302 Pressure Controller Manual.pdf - 第7页
Safety 1-1 SIG05_EN_A_0100 2000 Nordson Corporation Section 1 Safety Introduction Read and follow these safety instructions. T ask- and equipment-specific warnings, cautions, and instructions are included in equipment do…
O-2
Introduction
2005 Nordson Corporation
All rights reserved
NI_EN_L-1105
Outside Europe / Hors d’Europe / Fuera de Europa
For your nearest Nordson office outside Europe, contact the Nordson
offices below for detailed information.
Pour toutes informations sur représentations de Nordson dans votre
pays, veuillez contacter l’un de bureaux ci-dessous.
Para obtener la dirección de la oficina correspondiente, por favor
diríjase a unas de las oficinas principales que siguen abajo.
Contact Nordson Phone Fax
Africa / Middle East
DED, Germany 49-211-92050 49-211-254 658
Asia / Australia / Latin America
Pacific South Division,
USA
1-440-685-4797 −
Japan
Japan 81-3-5762 2700 81-3-5762 2701
North America
Canada 1-905-475 6730 1-905-475 8821
USA
Hot Melt 1-770-497 3400 1-770-497 3500
Finishing 1-880-433 9319 1-888-229 4580
Nordson UV 1-440-985 4592 1-440-985 4593
Safety
1-1
SIG05_EN_A_0100
2000 Nordson Corporation
Section 1
Safety
Introduction
Read and follow these safety instructions. Task- and equipment-specific
warnings, cautions, and instructions are included in equipment
documentation where appropriate.
Make sure all equipment documentation, including these instructions, is
accessible to persons operating or servicing equipment.
Qualified Personnel
Equipment owners are responsible for making sure that Nordson equipment
is installed, operated, and serviced by qualified personnel. Qualified
personnel are those employees or contractors who are trained to safely
perform their assigned tasks. They are familiar with all relevant safety rules
and regulations and are physically capable of performing their assigned
tasks.
Regulations and Approvals
Make sure all equipment is rated and approved for the environment in which
it is used. Any approvals obtained for Nordson equipment will be voided if
instructions for installation, operation, and service are not followed.
Safety
1-2
SIG05_EN_A_0100
2000 Nordson Corporation
Personal Safety
To prevent injury follow these instructions.
Do not operate or service equipment unless you are qualified.
Do not operate equipment unless safety guards, doors, or covers are
intact and automatic interlocks are operating properly. Do not bypass or
disarm any safety devices.
Keep clear of moving equipment. Before adjusting or servicing moving
equipment, shut off the power supply and wait until the equipment
comes to a complete stop. Lock out power and secure the equipment to
prevent unexpected movement.
Relieve (bleed off) hydraulic and pneumatic pressure before adjusting or
servicing pressurized systems or components.
Obtain and read Material Safety Data Sheets (MSDS) for all materials
used. Follow the manufacturer’s instructions for safe handling and use
of materials, and use recommended personal protection devices.
To prevent injury, be aware of less-obvious dangers in the workplace
that often cannot be completely eliminated, such as hot surfaces, sharp
edges, energized electrical circuits, and moving parts that cannot be
enclosed or otherwise guarded for practical reasons.