00193871-06.pdf - 第10页
Installation Manual for Windows XP (unattended setup) for SIPLACE Computers 01/2005 US+DE 5 Bugfixing 5.1 Hotfixes for the operating system SP1 Q282784; Q819760; Q822603; Q82 3182; Q824141; Q824151; Q825119; Q826939; Q82…
Installation Manual for Windows XP (unattended setup) for SIPLACE Computers 01/2005 US+DE
4 Requirements
4.1 Hardware
Station computer:
- 128 MB RAM
Supported computer hardware:
- CPU076
- CPU086
- SCENIC C600
- SCENIC C610
- SCENIC P300, i845GE
- SCENIC P300, i865G
- SCENIC N300, i845GE
- SCENIC N300, i865G
- SCENIC N320
- Econel 30
- Econel 40
- Econel 50
Supported touch screen displays:
- Elo Touch (15”)
- Micro Touch (15”)
4.2 Required configuration parameters
For the installation procedure, please note the following information:
1
User Name
2
Company Name
3
IP address of the station computer (Default: 172.22.100.100)
4
IP address of the programming system (Default: 172.22.100.102)
5
IP address of the default gateways (Optional, if no Remote Support was installed no entry.
Default: no entry)
6
Subnet mask of the local IP network
9
Installation Manual for Windows XP (unattended setup) for SIPLACE Computers 01/2005 US+DE
5 Bugfixing
5.1 Hotfixes for the operating system
SP1
Q282784; Q819760; Q822603; Q823182; Q824141; Q824151; Q825119; Q826939; Q828035; Q828741;
Q833987; Q835732; Q837001; Q839643; Q839645; Q840315; Q840374; Q840987; Q841356; Q841533;
Q841873; Q870669; Q873376; Q329623; Q871250; Q891711; Q890175; Q885835; Q873339; Q885836
5.2 Hotfixes for MADC
Q832483
5.3 Hotfixes for the Internet Explorer
SP1
Q832894 Q889293
10
Installation Manual for Windows XP (unattended setup) for SIPLACE Computers 01/2005 US+DE
6 Installation
Note:
In the general part of the setup, you have to answer with „Yes“ or „No“. In the second part you
can switch between the wizard dialogs with „Next“ or „Back“ buttons.
With the „Cancel“ button you can abort the whole installation procedure.
6.1 Installation procedure
→ Insert the BOOT CD-ROM (Boot CDROM for Windows XP Professional) to start the unattended
setup into the CD ROM drive.
→ Reboot the computer.
→ Please change the boot devices in your BIOS if the system doesn’t accept the CD ROM drive
as the boot medium.
→ Attention for Scenic C610 computers: If you connect your keyboard via USB interface, you
have to ensure the “legacy USB” option in the System BIOS to be enabled. To do this:
press the F2 key at boot time.
Navigate to the “Advanced” menue.
You will see a screen that looks like this:
Advanced
Peripheral Configuration
------------------------------------------------
Serial 1: [Enabled]
Serial 1 Address: [3F8h, IRQ 4]
Serial 2: [Enabled]
Serial 1 Address: [2F8h, IRQ 3]
Parallel: [Enabled]
Parallel Mode: [Printer]
Parallel Address: [378h, IRQ 7]
USB Host Controller: [Enabled]
USB 2.0 Host Controller: [Enabled]
USB Legacy Support: [Disabled]
Serial ATA Configuration
Diskette Controller: [Enabled]
Mouse Controller: [Enabled]
LAN Controller: [Enabled]
LAN Remote Boot: [Disabled]
Audio Controller: [Disabled]
Item Specific Help
-----------------------------------
F1 Info
To activate the option “USB Legacy Support”, navigate to it and press the space bar.
After that you have to exit the BIOS setup and save your changes.
11