00191369-02.pdf - 第36页

1 Introduction User Manual HS-50 1.11 Overview of the modules - controls Software Version SR.501.xx 12/99 Issue U S 36 t I I t Keyboard 1 A keyboa rd wit h the trac kball is loc ated be neath ea ch sc reen . The keybo ar…

User Manual HS-50 1 Introduction

Software Version SR.501.xx 12/99 Issue US 1.11 Overview of the modules - controls

t IIt

1.11.2 Description

All the controls can be reached by a 1.60 m tall person. 1

Main switch 1

The main switch is used to switch the power supply to the placement system on and off. 1

RISK OF DEATH

Some parts inside the placement system carry potentially lethal voltages - even when switched off

at the main switch. 1

Key switch 1

In normal mode, the key switch is set to "0". The key should be removed and kept in a safe place.

It must only be turned to position "I" (set-up mode) by authorized personnel, and then only for cer-

tain maintenance and servicing work. 1

Stop button 1

This button is used to stop the placement system. 1

Start button 1

This button starts the placement system after it has been switched on or after faults have been

eliminated. 1

Emergency stop mushroom-head push-button 1

The emergency stop mushroom-head push-button latches into place when it is pressed. The

power supply for the gantry axes, component tables, conveyor belts and cutting devices is inter-

rupted and the voltage to the star axes of the placement heads is reduced. The button must be

turned to release it. 1

Component counter 1

The component counter displays the number of components processed. 1

LCD screen 1

There is a flat LCD screen with a touch-sensitive surface (touch-screen) on either side of the

placement system. The screen resolution is 1024 x 768 pixels. 1

1 Introduction User Manual HS-50

1.11 Overview of the modules - controls Software Version SR.501.xx 12/99 Issue US

t IIt

Keyboard 1

A keyboard with the trackball is located beneath each screen. The keyboards can be pulled in and

out as required. 1

Indicator lamps 1

The sequence of colors is white - green - white. These lamps are used to signal operating statuses

and malfunctions of the placement system. 1

Component barcode reader 1

There is a compartment for a Datalogic DL 910 component barcode reader on either side of the

machine. The barcode reader enables the components to be set up and topped up quickly and

reliably. 1

1.11.3 Ergonomic arrangement of the controls

Figure 1.11 - 1 on page 34 provides an overview of the position of the controls, which are subdi-

vided into the following groups: 1

Operating panel on the right-hand side of the central console with 1

– LCD screen

– Keyboard with trackball

– Start button

– Component barcode reader

Operating panel on the left-hand side of the central console with 1

– LCD screen

– Keyboard with trackball

– Component counter

– Start button

– Stop button

–Key switch

– Component barcode reader

– Main switch

Input / output side of the PCB conveyor with 1

– Emergency stop mushroom-head push-buttons

User Manual HS-50 1 Introduction

Software Version SR.501.xx 12/99 Issue US 1.11 Overview of the modules - controls

t IIt

1.11.3.1 Controls on the left / right-hand operating panel of the placement system

The two operating panels have identical control functions. 1

Monitor, keyboard, Start and Stop buttons 1

There is a monitor and a keyboard on both sides of the placement system. They are arranged so

that any person who is at least 1.60 m tall can work comfortably and efficiently. 1

The Start and Stop buttons are located beneath the keyboard. The on-screen dialog will occasion-

ally prompt you to activate certain actions using buttons, and this arrangement will make it easier

for you both to activate and to interactively control these actions. 1

Key switch 1

The key switch is located on the left-hand operating panel beneath the Start and Stop buttons. It

is only needed for setting up and servicing work so, for reasons of efficiency, it is positioned near

the Start and Stop buttons. 1

Main switch 1

The main switch is part of the power supply unit, so it is positioned on the left-hand operating

panel. It is located here because it is only needed for servicing and maintenance work. With re-

spect to its infrequent use the switch is still ergonomically positioned. 1

Component barcode reader 1

The four component tables for supplying components are arranged on the right and left of the

placement system. For this reason, the component barcode readers are also located in the central

consoles, since it enables the operators to work comfortably and efficiently during the component

set-up and filling checks. 1

1.11.3.2 Controls on the input and output side of the placement system

The controls on the input and output side of the placement system are identical. 1

Emergency stop mushroom-head push-button and Start button 1

An emergency stop mushroom-head push-button and two Start buttons are located on both the

input and the output side of the PCB conveyor. This arrangement was adopted for the emergency

stop mushroom-head push-buttons because it enables them to be reached quickly and easily from

any position. 1

In addition, it is important to have an unrestricted view of the placement heads and placement area

during maintenance, servicing and setting up work in order to be able to check all the operations

carried out inside the machine. This is particularly important during testing phases or when start-

ing single functions, for example. 1