00191369-02.pdf - 第59页
User Manual HS-50 2 Operational Safety Software Version S R.501.xx 12/99 Issue US 2.1 Safety instructions 59 t I I t 2.1.6 Safety inst ructions for closing the protec tive covers T o pr event all risk o f injury when clo…
2 Operational Safety User Manual HS-50
2.1 Safety instructions Software Version SR.501.xx 12/99 Issue US
58
t IIt
2
Item 9 in Figure 2.1 - 1 showing the warning signs on the placement system - on the UPS and
station computer (beneath the PCB conveyor) 2
2
Item 10 in Figure 2.1 - 1 showing the warning labels on the safety screens of the machine 2
Item 11 in Figure 2.1 - 1
showing the warning labels on the cover plate of the placement system2
Warning!
When the main switch is switched off
under voltage
Nicht in die laufende
Maschine greifen
Do not put your hands
into working machine
User Manual HS-50 2 Operational Safety
Software Version SR.501.xx 12/99 Issue US 2.1 Safety instructions
59
t IIt
2.1.6 Safety instructions for closing the protective covers
To prevent all risk of injury when closing the protective covers on the machine, all personnel must
be required to follow the instructions below when closing the covers. 2
RISK OF CRUSHING HANDS IF THE PROTECTIVE COVERS ARE NOT CLOSED
CORRECTLY 2
2
Fig. 2.1 - 2 Safety instructions for closing the protective covers
(1)Protective covers
(2)Recessed grips
2
Å When opening or closing the protective covers, always hold the covers by the recessed grips.
If the shock absorbing capacity of the protective covers reduces over time, for example, your
hands can easily be crushed if you do not close the covers using the recessed grips.
2
2 Operational Safety User Manual HS-50
2.1 Safety instructions Software Version SR.501.xx 12/99 Issue US
60
t IIt
2.1.7 Safety instructions for changing the component table
WARNING Never reach into the gaps between the component changeover table
and the placement system frame while the machine is running (item 1 in Fig. 2.1 - 3). 2
WARNING Always check that the component table is docked on the placement sys-
tem before connecting or disconnecting the power cable for the component changeover table at
the socket on the placement system (item 2 in Fig. 2.1 - 3). 2
WARNING NEVER connect the connecting cable for the component table to the
socket on the placement system and then operate the component table outside the machine via
the compressed air control unit (item 3 in Fig. 2.1 - 3). 2
2
Fig. 2.1 - 3 Safety instructions for the component table