TK26714.PickHeightTeaching.pdf - 第14页

 SMT Software Engineering Group  IM Operations Y AMAHA MOTOR CO., L TD  MDOC-SOFT50389   14/18  Fig 4.2 [Parts Dat a T ake Over Setting] s creen 4.3 Reading fixed board data This function is supposed to be used wi…

100%1 / 18
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD
MDOC-SOFT50389
13/18
On a machine supported with head variation, you can select several nozzle groups. In that
case, it is necessary to select nozzles for each group. Select a nozzle group from the combo
box.
< Caution >
When a carbon tape guide is used, 303, 314, 603, 503, and 514 nozzles are not available
for pick height teaching.
4.2 Takeover of Parts Data
Parts data takeover file is saved in “D:¥Machine¥Status¥PartsTakeOver¥” by default. By
setting the saving path to the server, the teaching results can be taken over among several
machines.
To change the takeover file path, open the [Software Setting] – [Monitor] – [Parts Data Take
Over] – [Parts Data Take Over Setting] screen, and enter a file path in [Server Path].
< Caution >
Files in the specified folder can be deleted automatically, so that do not save any other files
than a parts data takeover file "Feeder_*.sts" there.
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD
MDOC-SOFT50389
14/18
Fig 4.2 [Parts Data Take Over Setting] screen
4.3 Reading fixed board data
This function is supposed to be used with board data that has mount data, but it is available
without mount data as long as fixed board data is read. In this case, mounting heads and
nozzles are automatically determined. Please note that the determined combination of
heads and nozzles will be different from that you want to set.
Read the fixed board data specified in the following screen.
(▲1)
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD
MDOC-SOFT50389
15/18
Fig 4.3 Fixed board data setting
5.
Limitations
This function doesn’t work on a machine not supported for SS feeder and ZS feeder.
This function doesn’t work with any other feeders than 4mm or 8mm feeders.
When carbon tape guides are used, nozzles of 3
03, 314, 603, 503, and 514 are not
available.
Flying Nozzle Change is not supported.
Single Fiducial Camera may not recognize a guide in some area.