00193897-0302_AI_MTC2+BE_DE+EN.pdf - 第103页

Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series Edition 07/2009 101 : S tow connectors, couplings and furth e r cable material in the op ening in the machine frame. ( 1 ). : Fit the side …

Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series

Edition 07/2009

100

Tab. 2.7 - 1 Component docking unit: Connectors SIPLACE HF (from A001) and X-series.

: Route the cables and hoses in the cable duct.

SIPLACE HF (from A001) and X-series

Cable harness component docking unit

S-tape feeders (03021067-)

Location 1 Location 2 Location 3 Location 4

X110

ODU connector on docking unit frame

Splice Detection (Option)

030021021-

Power

X1*1

03021022-

X111

03002491-

X121

03002492-

X131

03002493-

X141

03002494-

Component signalling

24V 1-wire

X1*2

03021019-

X112

03002541-

X122

03002530-

X132

03002534-

X142

03002546-

Component safety

X1*3

03021020-

X113

03002542-

X123

03002531-

X133

03002535-

X143

03002547-

CAN bus / 1 wire (in)

X1*5

03021018-

X115

03010051-

X125

03010053-

X135

03010054-

X145

03010052-

CAN bus / 1 wire (out)

X1*6

03021018-

X116

03010050-

X126

03010054-

X136

03010059-

X146

03010051-

Docking unit valve on/off

X2*4

03021030-

X2fn

03017446-

X2gn

03017447-

X2hn

03017448-

X2kn

03017449-

Pneumatic supply bulk case 03004200- 03004679- 03004679- 03004679- 03004679-

Option nozzle changer /

Reject bin sensors

1-wire hub / CAN bus X1*q

Supply 1-wire hub X3*q

Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series

Edition 07/2009

101

: Stow connectors, couplings and further cable material in the opening in the machine frame. (1).

: Fit the side covers (2) of

the machine frame.

Fig. 2.7.4 Component docking unit with outer cover (HF-series, location 2-4).

: If provided, mount the conveyor cover, nozzle changer and reject bin sensors. For further in-

formation, see the latest

instructions:

00193892-xx Assembly instructions conveyor cover SIPLACE HF-series / X-series / D3

00193756-xx Assembly instructions nozzle changer SIPLACE HF-series

00194550-xx Assembly instructions reject bin sensors SIPLACE HF-series

00194482-xx Assembly instructions nozzle changer SIPLACE X-series

194716-xx Assembly instructions reject bin sensors SIPLACE

X-series

Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series

Edition 07/2009

102

Mount parts from retrofit kit

: The following parts must be mounted or fitted:

1. Cover long EGS centre

2. Barcode foil X sector 2 or barcode foil X sector 4

3. Machine cover X-F cover cpl./

Machine cover X-S cover cpl./

4. Protection X-HS R barcode panel cpl.

5. Wasteþtape chute

Fig. 2.7.5 SIPLACE HF location 2/4 (1-gantry placement area).

: Fit the cover over the pneumatic unit or power supply.