00193897-0302_AI_MTC2+BE_DE+EN.pdf - 第92页
Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-se ries Edition 07/2009 90 : Mount the strip using the four screws. 2 : Slide the side par t fully in place and screw tight. 2 2 : Insert both cap…
Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series
Edition 07/2009
89
2.6.2 Assembly of machine protection
: Mount side wall.
2
: Fix earthing cable.
: Connect the connector.
2
2
2
Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series
Edition 07/2009
90
: Mount the strip using the four screws.
2
: Slide the side part fully in place and screw tight.
2
2
: Insert both caps in the screw holes on the outside of the machine (see Fig. above).
Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series
Edition 07/2009
91
: Fix the bolts (inside) for assembly of the machine cover.
: Mount the side wall on the left next to it.
: Screw the inner and outer machine cover in place with the four nuts and bolts.
2
2
2
2
2
2