00193897-0302_AI_MTC2+BE_DE+EN.pdf - 第86页
Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-se ries Edition 07/2009 84 2 Observe sequence: The reamed bo lt must be tightened fir st and then the other fixing bolt s. This ensures correct se…
Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series
Edition 07/2009
83
2
See diagram ‘Assembly positions according to machine type and location’.
2
: Push the component docking unit into the required position.
2
2
2
2
Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series
Edition 07/2009
84
2
Observe sequence:
The reamed bolt must be tightened first and then the
other fixing bolts. This ensures correct sea-
ting of the MTC slide-in framework. 2
: Screw in the reamed bolt and then the fixing bolts without tightening.
: First tighten the reamed bolt, then the fixing
bolts on the inside of the machine.
2
Fig. 2.6.3 Reamed bolt
Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series
Edition 07/2009
85
2
Fig. 2.6.4 Assembly of component docking unit
2
2
2
2
2
2
2
2
2
2
2
2