Galaxy EX Safety Features.pdf - 第4页
SA FETY FEA TUR ES MACHINE SAFETY FEATURES 2.4 Tech nical R efer enc e Manu al Ch apte r Issu e 6 , Jun 18 Man da tory Not ices Man da tory notic es dr aw th e atte ntio n of users/ mai nt ain er s to the pre scr ibe d b…
SAFETY FEATURES
MACHINE SAFETY FEATURES
Chapter Issue 6, Jun 18 Technical Reference Manual 2.3
Caution Notices Caution notices draw the attention of users/maintainers to a potentially
hazardous situation which, if not avoided may result in minor or moderate
injury. The following table displays the caution labels affixed to the machine
and/or displayed in the machine documentation:
WARNING
COMPRESSED AIR. COMPRESSED AIR SHOULD NEVER IMPINGE
UPON THE BODY. PORTS, PIPES, ETC MUST NEVER BE BLOCKED
BY HAND. BEFORE CONNECTING OR DISCONNECTING ANY
PNEUMATIC COMPONENTS, ENSURE THE COMPRESSED AIR
SUPPLY HAS BEEN DISSIPATED AND DISCONNECTED FROM THE
MACHINE.
WARNING
E STOP CIRCUIT. THE E STOP CIRCUIT FITTED TO THE MACHINE
ONLY ISOLATES THE 24V AND 42V SUPPLIES TO THE MAIN CON-
TACTORS. LETHAL VOLTAGES ARE STILL PRESENT WITHIN THE
MACHINE AFTER THE E STOP HAS BEEN ACTIVATED.
WARNING
HARMFUL SUBSTANCES. CLEANING WIPES AND CLEANING
SOLUTIONS MAY CONTAIN SUBSTANCES HAZARDOUS TO
HEALTH. OBSERVE ALL MANUFACTURERS’ HEALTH AND SAFETY
GUIDELINES. ALWAYS WEAR APPROVED PROTECTIVE CLOTHING
WHEN CLEANING THE MACHINE.
WARNING
MACHINE LIFTING. TO PREVENT SERIOUS INJURY TO PERSON-
NEL, DURING LIFTING AND TRANSPORTATION OPERATIONS,
ENSURE THE MACHINE IS LIFTED AND TRANSPORTED IN ACCOR-
DANCE WITH INSTRUCTIONS DETAILED IN THIS SECTION.
WARNING
SOLVENT SPRAY. THE UNDERSCREEN CLEANER SPRAYS A FINE
JET OF SOLVENT SOLUTION ON TO THE CLEANER. APPROVED
PROTECTIVE CLOTHING SHOULD BE WORN.
Symbol Definition
Symbol Definition
CAUTION
RECOMMENDED SOLVENTS. ANY SOLVENTS USED MUST COM-
PLY WITH LOCAL ENVIRONMENTAL GUIDELINES. ASM RECOM-
MEND USING SOLVENTS THAT ARE ENVIRONMENTALLY
FRIENDLY, IE CFC FREE AND WATER BASED. SOLVENTS USED
MUST HAVE FAST EVAPORATION RATES AND FLASHPOINT SPEC-
IFICATIONS GREATER THAN 39ºC.
CAUTION
SOLDER PASTE AND SOLVENTS. WHEN USING OR HANDLING ANY
SOLDER PASTE OR SOLVENT FORMULATION THE MANUFACTUR-
ERS’ RECOMMENDED SAFETY PRECAUTIONS MUST BE STRICTLY
ADHERED TO.
SAFETY FEATURES
MACHINE SAFETY FEATURES
2.4 Technical Reference Manual Chapter Issue 6, Jun 18
Mandatory Notices Mandatory notices draw the attention of users/maintainers to the prescribed
behaviour to be adhered whilst engaged in this activity. The following table
displays the mandatory labels affixed to the machine and displayed in the
machine documentation:
SEMI Labelling The following table displays the SEMI labelling applied to the machine:
CAUTION
SOLVENT SOLUTION. DO NOT MIX SOLVENT SOLUTIONS. FLUSH
THE SOLVENT TANK THOROUGHLY WHEN CHANGING TO A DIF-
FERENT SOLVENT SOLUTION.
CAUTION
ANTI- STATIC HANDLING. STANDARD PRECAUTIONS MUST BE
ADHERED TO WHEN HANDLING ELECTRONIC CARDS AND CON-
FIGURING AND INSERTING INTO THE ENCLOSURES.
Symbol Definition
Symbol Definition
MANDATORY
TOXIC CHEMICALS MAY BE PRESENT. SAFETY GLOVES MUST BE
WORN.
MANDATORY
TOXIC CHEMICALS MAY BE PRESENT. EYE PROTECTION MUST BE
WORN.
Warning Definition Location
MOVING MECHANICAL PARTS
Removing this cover exposes moving
mechanical parts that have the potential
to cause serious injury. Disconnect and
lock out the system power before
removing this cover. Refer to the Lock-
out procedure at the end of this chapter.
GENERAL WARNING
Refer to the Operator manual or the
front of this chapter for a list of all warn-
ings and their definitions.
Left Hand Upper
Side Panel
WARNING
Moving Mechanical PartsMoving Mechanical Parts
Removing covers could result
in serious injury
Removing
covers could result
in
serious injury
Disconnect and lock out system power
before servicing refer to the
Technical Reference manual
Disconnect
and lock out system power
before
servicing refer to the
Technical
Reference manual
SAFETY FEATURES
MACHINE SAFETY FEATURES
Chapter Issue 6, Jun 18 Technical Reference Manual 2.5
MOVING MECHANICAL PARTS
Removing this cover exposes moving
mechanical parts that have the potential
to cause serious injury. Disconnect and
lock out the system power before
removing this cover. Refer to the Lock-
out procedure at the end of this chapter.
STRONG MAGNETIC FIELD
A strong magnetic field exists in the
vicinity of the camera linear motors.
These may represent a serious hazard
to people fitted with a pacemaker.
GENERAL WARNING
Refer to the Operator manual or the
front of this chapter for a list of all warn-
ings and their definitions.
Right Hand Upper
Side Panel
POTENTIAL HAZARDS
Removing this cover may expose oper-
ators to parts that have the potential to
cause minor injury.
GENERAL WARNING
Refer to the Operator manual or the
front of this chapter for a list of all warn-
ings and their definitions.
Left Hand & Right
Hand Safety Covers
ELECTRO MECHANICAL HAZARDS
Removing this cover exposes electro-
mechanical parts that have the potential
to cause serious injury. This cover is
only to be removed by trained person-
nel.
GENERAL WARNING
Refer to the Operator manual or the
front of this chapter for a list of all warn-
ings and their definitions.
Front Cover
ELECTRO MECHANICAL HAZARDS
Removing this cover exposes electro-
mechanical parts that have the potential
to cause serious injury. Disconnect and
lock out the system power before
removing this cover. Refer to the Lock-
out procedure at the end of this chapter.
GENERAL WARNING
Refer to the Operator manual or the
front of this chapter for a list of all warn-
ings and their definitions.
Rear Cover
Warning Definition Location
WARNINGWARNING
Moving Mechanical PartsMoving Mechanical Parts
Removing covers could result
in serious injury
Removing covers could result
in serious injury
Disconnect and lock out system power
before servicing
Disconnect and lock out system power
before servicing
Refer to the Operator and
Technical Reference manuals
Refer to the Operator and
Technical Reference
manuals
An electromagnetic field exists
within the machine from the camera
linear motors.
These may present a hazard to people
fitted with an implanted cardiac device.
The motor manufacturer recommends
a safe distance of at least 15mm.
An electromagnetic field exists
within
the machine from the camera
linear motors.
These may present a hazard to people
fitted with an implanted cardiac device.
The motor manufacturer recommends
a safe distance of at least 15mm.
Electro Magnetic FieldElectro Magnetic Field
Potential HazardsPotential Hazards
Removing cover may expose
operators to minor injury
Removing
cover may expose
operators
to minor injury
Refer to the Operator manualRefer
to the Operator manual
CAUTIONCAUTION
Electro Mechanical HazardsElectro Mechanical Hazards
Removing cover could result
in serious injury
Removing
cover could result
in
serious injury
Only to be removed by
trained personnel
Only
to be removed by
trained
personnel
WARNING
WARNINGWARNING
Electro Mechanical HazardsElectro Mechanical Hazards
Removing cover could result
in serious injury
Removing
cover could result
in
serious injury
Disconnect and lock out system
power before servicing refer to
the Technical Reference manual
Disconnect
and lock out system
power
before servicing refer to
the Technical
Reference manual