User Manual E-by-SIPLACE 用户手册.pdf - 第168页

3 Technical data and assemblies User manual E by SIPLACE 3.10 Changeover table for E by SIPLACE From software version SC 712.1 Edition 05/2019 168

User manual E by SIPLACE 3 Technical data and assemblies

From software version SC 712.1 Edition 05/2019 3.10 Changeover table for E by SIPLACE

167

Fig. 3.10 - 9 Empty tape duct on the E by SIPLACE changeover table COT insert

(1) Inlet slot for used tape

(2) Outlet slot for the used tape above the pneumatic tape cutter

(3) Empty tape duct < 12 mm up to 25 mm (can be removed for tapes > 12 mm)

The empty tape duct can guide component tapes with a maximum pocket height of 12 mm. If

feeder modules which use tapes with a pocket height of > 12 mm are used, use the 25 mm

empty tape duct.

PLEASE NOTE

Risk of blockages!

When using feeder modules with low pockets next to feeder modules with high pockets,

there is a risk of blockages in the empty tapes.

 Do not position feeder modules with shallow pockets immediately beside feeder mod-

ules with deep pockets.

(1)

(2)

(3)

3 Technical data and assemblies User manual E by SIPLACE

3.10 Changeover table for E by SIPLACE From software version SC 712.1 Edition 05/2019

168

User manual E by SIPLACE 4 Setting up and commissioning

From software version SC 712.1 Edition 05/2019 4.1 Transportation and delivery configuration

169

4 Setting up and commissioning

4.1 Transportation and delivery configuration

4.1.1 Shipping packaging

Within Europe, the machine and changeover tables will be shipped on two wooden pallets, pack-

aged in plastic film. Outside Europe, the machine and changeover tables are supplied in wooden

crates.

4.1.1.1 Shipping packaging dimensions

The dimensions of the pallets and wooden crates are listed in the following table:

Fig. 4.1 - 1 Transport crate - dimensions in millimeters

(A) Pallet jack attachment points

Wooden crate Machine (L x W x H) Changeover table (L x W x H)

Standard 2180 mm x 1770 mm x 1830 mm

1050 mm x 1050 mm x 1150 mm

Extended (with

1200 mm LBO)

2180 mm x 2330 mm x 1830 mm