User Manual E-by-SIPLACE 用户手册.pdf - 第303页
User manual E by SIPLACE 6 Station extensions From software version SC 712.1 Edition 05/2019 6.7 Adjustable co nveyor clamping 303 6 Fig. 6.7 - 2 Adjustable conveyor clamping - Operation Instructio n Loosen t he screws…
6 Station extensions User manual E by SIPLACE
6.7 Adjustable conveyor clamping From software version SC 712.1 Edition 05/2019
302
6.7 Adjustable conveyor clamping
Item no. 03123019-xx Adjustable Stop Guide Rail E
The adjustable conveyor clamping is designed to cater for standard E conveyor up to 460 x 460
to handle PCB with fiducials near the edge. Top clamping are adjustable so customer can fix any-
where to avoid PCB fiducials.
This option can be used on the following conveyor part numbers:
Item no. 03108391-xx Fixed Conveyor Rail Right E 6
Item no. 03110457-xx Fixed Conveyor Rail Left E 6
6
Fig. 6.7 - 1 Adjustable conveyor clamping
(1) Adjustable Stop Guide Rail E
(1)
(1)
User manual E by SIPLACE 6 Station extensions
From software version SC 712.1 Edition 05/2019 6.7 Adjustable conveyor clamping
303
6
Fig. 6.7 - 2 Adjustable conveyor clamping - Operation Instruction
Loosen the screws (1) to adjust the locations of these stop guides. Then tighten back the
screws when the positions are fixed by the user.
(1)
(1)
6 Station extensions User manual E by SIPLACE
6.8 SIPLACE Preparation Table E From software version SC 712.1 Edition 05/2019
304
6.8 SIPLACE Preparation Table E
Item no. 03112358-xx SIPLACE Preparation Table E
The SIPLACE Preparation Table E can hold a maximum of 60x SIPLACE SmartFeeder 8 mm E-
with component reel (size 7”, 10”, 13”, 15” & 17”). Feeders can be placed from the top or slid along
the extruded guide profiles. Align each feeder by inserting feeder stop pin into the slots of the
guide plate. SIPLACE Preparation Table E allows the SIPLACE PowerAdaptor E (see section 6.9
on page 305) to be attached and detached without tools.
6
Fig. 6.8 - 1 SIPLACE Preparation Table E
(1) Guide profile
(2) Feeder parking unit
(3) SIPLACE SmartFeeder E
(4) Mounting interface for SIPLACE Power Adapter E (Optional)
(5) Tape reel container
(4)
(3)
(2)
(5)
(1)