JUKI FX-3R MAINTENANCE GUIDE.pdf - 第87页

FX-3R Maintenance Guide 8-5 2) Replacing the cable (RFID JOINT CABLE ASM: 40079659) c Before replacing the cable, disconnect the cable connection from the antenna and relay connector. d Disconnect t he cable from the cab…

FX-3R Maintenance Guide

8-4

8-1-6. Replacing the Cables and Connectors of Replacement Table (For Intelli trolley)

1) Replacing the connector (HK065120060)

c Before replacing the connector, disconnect the cable connected to both ends of the

connector.

Connector

HK065120060

Portion A

Figure 8-1-6-1 Replacement Table when Viewed from Mounter

(From Obliquely downward View Field)

d When mounting the connector, pay special attention to its orientation as shown in the Figure

below.

Mounter side

Lock part faces

downwa

Rear side

Lock part faces

ward.

Figure 8-1-6-2 Enlarged Drawing of Portion A

e Connect the cable to both ends of the connector. (The connector on the mounter side is

located on the OUT side.)

Rev. 1.00

FX-3R Maintenance Guide

8-5

2) Replacing the cable (RFID JOINT CABLE ASM: 40079659)

c Before replacing the cable, disconnect the cable connection from the antenna and relay

connector.

d Disconnect the cable from the cable securing materials (cable band and cable clamp).

e After the cable has been replaced, secure the cable and connect it to the connector in the

original manner.

RFID JOINT CABLE ASM:

40079659

OUT side

Figure 8-1-6-3 Cable Wiring Diagram 1

RFID JOINT CABLE ASM:

40079659

IN side

RFID side Antenna side

Figure 8-1-6-4 Cable Wiring Diagram 2

Rev. 1.00

FX-3R Maintenance Guide

8-6

8-1-7. Replacing the Antenna of the Replacement Table (For Intelli trolley)

1) Disconnect the cable from the connector of the antenna array.

Antenna array

40073664

RFID JOINT CABLE ASM

40079659

Figure 8-1-7-1 Replacement Table when Viewed from the Front (Feeder Insertion Side)

2) Remove the screws (6 pcs.) securing the antenna array.

Antenna array

40073664

Conductive tape

HX002680000

Shield bracket 60

40081207

Figure 8-1-7-2 Antenna Array Assembling Drawing

Rev. 1.00