SS-1189-002.pdf - 第6页

4 SS-1189 High Flexibility Function • The optional multi-functional heads for head modules will m ake it possible to mount larger varieties of components. Technology of High Precision Component Placement • Both X and Y a…

SS-1189

Realization of High Reliability

• Component thickness measurement

Linear measure sensor by the Component thickness measurement

• P.C.B upper surface measurement

Measure the P.C.B upper surface by the P.C.B height feed back function

• Soft placement

Soft mount nozzle to place the component lightly

• Each nozzle is provided with an electromagnetic valve to realize the

optimum control of vacuum ON/OFF actions.

• The following effects can be expected by using the tape feeder provided

with a joint detection unit.

Preventing the mis-placement of spliced and replenished components

Eliminating pickup errors caused due to component shortage

Establishing traceability under component replenishment (tape splicing)

Correcting the count (the number of remaining components)

Operating Condition

Applicable Feeders : GD-18080, GD-18081, GD-18082

GD-12161, GD-24321, GD-44561

Operation Mode : "Enable" for "Component Remain Mode"

Component ID Lookup : Used together with the ACV system (option)

※ It is also possible to use the tape feeders for GXH-1 series

However the cycle time of component pick-up is longer than one for the

GXH-3 series tape feeders

Tape feeder provided

with a joint detection unit

Vacuum point

0707-002

SS-1189

High Flexibility Function

• The optional multi-functional heads for head modules will make it possible

to mount larger varieties of components.

Technology of High Precision Component Placement

• Both X and Y axes are provided with linear motors and scales to realize the

high-speed・highly accurate component positioning.

Adoption of Linear Motors for X/Y Beam Driving

Fig. 5

• Servomotors are used to drive the head, making it possible to control the

head position with the encoder.

• A highly accurate mounting is always maintained by the automatic offset

teaching function, the self-calibration system, etc.

Comfortable Operation Environment

• A new operation environment is constructed and the self-diagnosis function

is enhanced, realizing the comfortable operation environment.

• When the machine was designed, the setup and maintenance work was

taken into consideration.

• The enhanced production support software realizes high productivity.

Other Functions

Standard Function

• Component Pick-Up Error Automatic Recovery Function

• Pick-up Location Teaching Function

• Pick-up Priority Function

• Alternate Function at Component Supply Section

• Programming Sorting Function

0707-002

SS-1189

• Pick-Up and Placement Up/Down-Axis (L-Axis) Control Function

• Pick-Up Position (X/Y) Correction Control Function

• Pocket outline recognition

• Two-stage placement Z-Axis speed reduction

• Nozzle existence check before pick-up

Options

• P.C.B height feed back function

• Soft mount nozzle

• Unit PCB B.B.R. Function

• Placement Coordinates Teaching Function

• Component Library Teaching Function

• Application for BGA/CSP

• Splicing

• Advance Notice and Instruction of Splicing

• Multiple Languages (Mandarin Chinese, Korean)

• Network Terminal

Programming Software

Pattern Program Optimization Software

Pattern Program Conversion Software (Our Products and Machines of

Other Brands)

CAD Conversion Software

Multi-Pattern Program Line Balance Software

Production Manager Software

• ACV System

Application Multi-tray (FP-G100,FP-G200)

P.C.B Traceability

• Off-line component library create system

• Application for large-sized board (Max. 610×460 mm)

• 2D bar code NC program change function

• High-resolution component recognition camera

• Flux dipping unit (Auto reload type / Manual reload type)

• Coplanarity check function

• Application for 0402

0707-002