SIPLACE D3 规格说明书英文版.pdf - 第23页
23 Component Feeding Alternative SIPLACE Feeder Modules Technical data Bulk case feeder modules a Packaging form Feeding rails Location Bulk case Chip 0402 component height: 0.5 mm Chip 0603 component height: 0.8 mm 1 Vi…
22
Component Feeding
S Tape Feeder Modules
Packaging Feeder module Width Loca-
tions
Transport
distance
Max.
CO height
Paper and
blister tapes
2 x 8 mm S
a
3 x 8 mm S
a
3 x 8 mm S 0201
b
3 x 8 mm SL
c
1 x 12/16 mm S
30.6 mm
30.6 mm
30.6 mm
30.6 mm
30.3 mm
1
1
1
1
1
2/4 mm
2/4/8 mm
2/4 mm
2/4/8 mm
4/24 mm
d
2.5 mm
e
2.5 mm
0.7 mm
2.5 mm
14 mm
e
Blister tapes 1 x 24/32 mm S
1 x 24/32 mm SDP
f
1 x 44 mm S
1 x 44 mm SDP
f
1 x 56 mm S
1 x 56 mm SDP
f
1 x 72 mm S
1 x 88 mm S
42.4 mm
42.4 mm
54.6 mm
54.6 mm
66.6 mm
66.6 mm
82.6 mm
98.6 mm
1.5
1.5
2
2
2.5
2.5
3
3.5
4/40 mm
d
4/40 mm
d
4/52 mm
d
4/52 mm
d
4/68 mm
d
4/68 mm
d
4/80 mm
d
4/96 mm
d
14 mm
24 mm
14 mm
24 mm
14 mm
24 mm
14 mm
14 mm
Tape reels 178 - 483 mm diameter (7" - 19")
Cycle S feeder modules up to 20 mm transport distance < 150 ms
Changeover
time
15 s
a) Extra fiducials provided for feeder position recognition
b) For 0201 and 0402 in paper tapes
c) SL = Shutterless, from 0201 in paper or blister tapes
d) Variable in 4 mm increments
e) PSA Kit available as an option
f) DP = Deep Pocket
23
Component Feeding
Alternative SIPLACE Feeder Modules
Technical data
Bulk case feeder modules
a
Packaging form
Feeding rails
Location
Bulk case
Chip 0402 component height:
0.5 mm
Chip 0603 component height:
0.8 mm
1
Vibratory stick feeder,
type 3
Packaging form
Number of tracks and width
Location
Stick steel magazines
3 x 9.5 mm
2 x 15 mm
1 x 30 mm
1
Dip module Takes up 3 locations of a
3 x 8 mm S feeder module
a) Extra fiducials provided for feeder position recognition
Description
The SIPLACE bulk case
feeder module processes
bulk cases on two tracks. It
feeds rectangular and round,
passive components. The
PCB magazines (bulk cases)
are simply replaced for refill-
ing - without stopping the
machine.
The module essentially con-
sists of the basic element
plus two feeder rails and
PCB magazines to suit the
component type and height.
The components are sepa-
rated and fed along the rails
by compressed air.
The principle of the fixed
component table has proven
its worth, even when bulk
cases are used: the vibra-
tions that can occur with
other placement machine
concepts can have a highly
detrimental effect on the
component quality due to
abrasion, for example.
Even with stick magazines,
the stationary component
supply has significant advan-
tages: the universal vibratory
stick feeder can be topped up
during placement.
The DIP module is suitable
for dip-fluxing flip-chips,
CSPs (chip-scale/size pack-
ages) and for wetting flip-chip
bumps with isotropic, con-
ductive adhesive.
Bulk case feeder module
Vibratory stick feeder, type 3
Dip module
24
Component Feeding
Dummy Feeder Modules
The following dummy feeder module variants are available for
component changeover tables:
SIPLACE dummy feeder module for 1 location
SIPLACE dummy feeder module for 6 to 10 locations
SIPLACE dummy feeder module for 11 to 20 locations
Danger
To ensure that your
SIPLACE placement ma-
chine runs safely, a feeder
must be assigned to every lo-
cation on the component
changeover table. If you do
not have enough feeder
modules, then you should
use dummy feeder modules
as space holders.
Dummy feeder module for 1 location
Dummy feeder module for
6 - 10 locations
Dummy feeder module for
11 - 20 locations