00198763-01_VD_SIPLACE_Pro_17.0_R19-2_EN_DE.pdf - 第18页
SIPLACE Pro 17.0 (R19-2) / Version Description 11/2019 Edition 18 5 Restrictions In the following, existing restri ctions in SIPLACE Pro are described . Miscellaneous – 10 -fold and 15-fold stick magazines cannot be comb…
SIPLACE Pro 17.0 (R19-2) / Version Description 11/2019 Edition
17
4.9 Placement Improvements – Automatic Pin 1 Recognition
To save time during placement, it is possible to limit the check period and check frequency per
component for the orientation check during position check.
For this, the Check pickup orientation on component change option in the Object Properties of
the Component Editor has been extended. If this option is activated, the check mode can be set to
either Manually by user or to Automatic. If the Automatic mode is selected, three further options
can be specified: the number of measurements, the checking period, and the check sequence.
4.10 Automatic Pitch Detection
The automatic pitch detection can be activated in the Feeder tab of the Component Editor via the
Auto pitch checkbox. In the new Cycle entry field, the number of cycles can be entered. The
range for the automatic pitch detection cycle is 50 – 5000, with a default value of 500. The
automatic pitch option is independent of the selected feeder.
4.11 Changing Users for a Running SIPLACE Pro Desk Session
The user privilege Log Off Other User has been introduced, with which it is possible to change the
user for a running SIPLACE Pro Desk instance without terminating the session.
The user can either be changed in a running SIPLACE Pro Desk session via the
Tools - Log On as An Other User option or the Log-on/Log-off option, or in a locked session via
the logon screen.
SIPLACE Pro 17.0 (R19-2) / Version Description 11/2019 Edition
18
5 Restrictions
In the following, existing restrictions in SIPLACE Pro are described.
Miscellaneous
– 10-fold and 15-fold stick magazines cannot be combined on the same linear feeder.
– SIPLACE Pro object names (e.g., recipe) must not exceed 125 ASCII characters (including
folder names).
– If various users optimize the same job at the same time, the job which was most recently
completed successfully will overwrite all corresponding recipes.
– The board panel hierarchy must not exceed 10 levels.
– The object folder hierarchy must not exceed 10 levels.
– The operator must manually place manual tray carriers (Carrier 30, Carrier 51, Carrier X,
Carrier SX, Arbitrary Carrier), glue feeders, dip modules, reject conveyors and power
connectors in the initial setup.
– If you work with reduced acceleration for a component shape, this is seen as a "special case"
and the accuracy of 5% for the simulated Optimizer production time will not be achieved.
– The Optimizer does not check if the tray size is bigger than the carrier.
– The WPC can take up to 10 different component types per level.
Station-wise Download
– It is not possible to switch over from dual lane conveyor in asynchronous transport mode to
dual lane conveyor in synchronous transport mode (and vice versa) in combination with station-
wise download.
– When the line control server is rebooted, station-wise downloading will be canceled. After
rebooting, you will need to perform a complete line download to restart production.
– Station-wise downloading supports setup changes in asynchronous dual operation only when
you have the same definition for both lanes.
ASCII Centroid Import
If component shapes are selected in the ASCII Centroid Import Wizard, all the existing links
between components and component shapes will be overwritten with the imported information.
WPC5 / WPC6
– Components up to a height of 30mm can be placed with a force of 70N with the WPC5 as of
serial number 1485 and the WPC6 as of serial number C1486 only.
– Components up to a height of 40mm can be placed with the WPC5 as of serial number B3000
and the WPC6 as of serial number C3000.
– Due to the refill module, components > 25mm cannot be positioned on the levels 1 – 3 and
27 – 28 on the WPC6. The levels 4 – 28 will be set up automatically by the SIPLACE Pro
Optimizer. The levels 1 – 3 have to be blocked manually by the operator.
– If a pin picker is installed on the X4i S placement machine, the maximum board length is
410mm.
SIPLACE Pro 17.0 (R19-2) / Version Description 11/2019 Edition
19
Binning can be disabled in SIPLACE Vision
– If binning is disabled in SIPLACE Vision, the measuring in the simulation result of the
optimization will probably take a little longer.
External Virtual Inkspot Handling
– Physical and virtual inkspots must not be mixed.
– The board must not contain any active inkspots.
Restrictions in the Production Schedule
PCB barcode mode is not supported.
Spring placement process
The board top edge position has to be constant from board to board to allow absolute placement.
Variable board warpages cannot be compensated.
Measuring and changing the component height measured by the component sensor at the
station
– Only for nozzle and component combinations in which the component height is supposed to be
measured with the component sensor.
– The component sensor will not perform any measurement if the component height
measurement is omitted due to SIPLACE Pro rules.
Conveyor Carrier X
– No travel range check.
– No pickup simulation.
– The Conveyor Carrier X uses one track on an X-table virtually. If the real table should be
completely occupied, the operator might have to remove a feeder from the table to create
space for the virtual feeder.
– No I-Placement mode.
– The SIPLACE Pro Optimizer does not consider the time it takes to fill up a tray with
components and change it.
Heavy Board Mode per board side
– No barcode mode possible.
Board Identification
– The Barcode located under the board property cannot be combined with the board barcode
mode.