SOM-1747-003.pdf - 第11页

10 Tg0969-PM-SO 0310-001 5.1 "Save / Load" T ab 5.1 "Save / Load" T ab The corresponding tab sheet enables the operator to save or load the placement data from the floppy in the drive of the front ser…

9 Tg0969-PM-SO0310-001

5. "FILE OPN." Window (Submenu)

••

• Window Layout

When the [FILE OPN.] button on the submenu bar is pressed in the

"MAINT." window, the following window (submenu) opens.

Fig. 4 "FILE OPN." Window (Submenu)

••

• Window Composition

*1 Tab and Tab Sheet

The "FILE OPN." window (submenu) is provided with the following

tab.

Table 1

Tab Description

Save / Load This tab sheet enables the operator to save the placement data

on a 3.5-inch floppy disk in the drive of the front service panel

or load the required data from the floppy disks (where the ma-

chine system data, the pattern program data, the placement

head/nozzle data, the nozzle data, etc., are saved) to the hard

disk of the machine.

10 Tg0969-PM-SO0310-001

5.1 "Save / Load" Tab

The corresponding tab sheet enables the operator to save or load the

placement data from the floppy in the drive of the front service panel.

••

• Sheet Layout

When the [Save / Load] tab is pressed in the "FILE OPN." window

(submenu), the following tab sheet appears.

Fig. 5 "Save / Load" Tab Sheet

••

• Sheet Composition

*1 "Type" Group Box

The following buttons are provided in this group box.

[Machine Sys] Button : When pressed, this button enables the

operator to save the machine system

data on a floppy disk or load the data

from the corresponding floppy disk to the

hard disk of the machine.

[Pattern Prgm] Button : When pressed, this button enables the

operator to save the pattern program

data on a floppy disk or load the data

from the corresponding floppy disk to the

hard disk of the machine.

11 Tg0969-PM-SO0310-001

5.1 "Save / Load" Tab

[Place Hd / Noz] Button : When pressed, this button enables the op-

erator to save the placement head/nozzle

data on a floppy disk or load the data from

the corresponding floppy disk to the hard

disk of the machine.

[Nozzle Data] Button : When pressed, this button enables the op-

erator to save the nozzle data on a floppy

disk or load the data from the correspond-

ing floppy disk to the hard disk of the ma-

chine.

[Manage Dt] Button : When pressed, this button enables the op-

erator to save the management data on

a floppy disk.

It is impossible to load a management

data file from the corresponding floppy

disk to the hard disk of the machine.

[Patt Prgm Mng] Button : When pressed, this button enables the op-

erator to save the pattern program man-

agement data on a floppy disk.

It is impossible to load a pattern program

management data file from the corre-

sponding floppy disk to the hard disk of

the machine.

[Comp Handling Err Rate Dt] Button:

When pressed, this button enables the

operator to save the component handling

error rate data on a floppy disk.

It is impossible to load a component han-

dling error rate data file from the corre-

sponding floppy disk to the hard disk of

the machine.

[Recall] Button: When pressed, this button saves the

recalled data on a floppy disk.

The recalled data cannot be read from

the floppy disk to the machine side.

*2 List of Files on Hard Disk

When one of the data type buttons (*1) is pressed, the correspond-

ing data files on the hard disk of the machine are listed.

When a line of listed file is pressed, the file is selected.

When a line of the selected file is pressed again, it cancels the

selection.

When the [Select All] button is pressed, all listed files are selected

at a time.

When the [Cancel All] button is pressed, the selection of all listed

files is canceled.