SIPLACE DX1DX2-Spec-设备性能参数-EN-DMS.pdf - 第23页
23 PCB Conveyor I-Placement Alternating Placement Mode Alternating or I-Placement mode Distance of outer conveyor edges: 560 mm, 2 lanes, outer conveyor edges fixed Alternating or I-Placement mode Distance of outer conve…
22
PCB Conveyor
Technical Data
Single conveyor Flexible dual con-
veyor
Dual conveyor in single
conveyor mode
Standard dimensions
(length x width)
50 mm x 50 mm to
450 mm x 560 mm
a
a) When using boards with a width > 450 mm, make sure the peripheral module can also process the PCB width
concerned.
50 mm x 50 mm to
450mm x 262mm
50 mm x 50 mm to
450 mm x 460 mm
Dimensions with “Long
Board
b
”option
(length x width)
b) Longer boards available on request
50 mm x 50 mm to
610 mm x 560 mm
a
50 mm x 50 mm to
610mm x 262mm
50 mm x 50 mm to
610 mm x 460 mm
Stationary conveyor side Right, left or outer
Automatic electrical width
adjustment-
Yes
PCB thickness
Standard:
"Thick board" option
0.3 mm to 4.5 mm
4.5 mm to 6.5 mm
PCB warpage see page 24
PCB weight
c
Standard
“Heavy Board” option
c) The board weight value refers to the weight of the board plus the weight of the components.
max. 2.0 kg
max. 5.0 kg
max. 1.0 kg
max. 2.0 kg
max. 2.0 kg
max. 5.0 kg
Clearance on PCB
underside
d
d) The free positioning of board supports is limited by the stop bar.
30 mm 30 mm
PCB transport height
Option:
Standard:
SMEMA option:
900 mm
930 mm
950 mm
Type of interface:
Standard:
Option:
SMEMA
Siemens
Component-free PCB
handling edge
3.0 mm
PCB changeover time
Single conveyor
Dual conveyor
e
e) 0 seconds in asynchronous mode, otherwise 1.5 seconds.
< 1.5 seconds
0 seconds
Important information for machines in combination with SIPLACE DX2/DX1:
When setting up a machine (D-, S-; F, HS, HF, X or SX series) next to a SIPLACE DX1/DX2, take note of the limited
space between the two machines. In these cases, you will need a 0.5 m conveyor between the SIPLACE DX1/DX2
and the adjacent machines.
23
PCB Conveyor
I-Placement
Alternating Placement Mode
Alternating or
I-Placement mode
Distance of outer conveyor
edges: 560 mm, 2 lanes, outer
conveyor edges fixed
Alternating or I-Placement
mode
Distance of outer conveyor
edges: 560 mm, 2 lanes, right
conveyor edges fixed
a
Alternating placement mode
Distance of outer conveyor
edges: 560 mm, dual conveyor
in single conveyor mode, right
conveyor edge fixed
a
max. 262
Movable conveyor side
Stationary conveyor side
a) Only the settings with fixed conveyor edge on the right are shown. A setting with the stationary conveyor edge on
the left is also possible. All dimensions in millimeters.
max. 262
281
560
min. 35
281
179
max. 262
281
min. 35
max. 262
560
max. 460
24
PCB Warpage
PCB warpage across the direction of travel
max. 1 % of the PCB diagonal, but not
exceeding 2 mm
PCB warpage on the conveyor
PCB warpage during placement
PCB transport direction
PCB warpage downwards max. 0.5 mm
Use the magnetic pin supports, to achieve
this value.
Conveyor belt
Fixed clamped edge
PCB warpage in direction of travel
+ PCB thickness < 5.5 mm
Fixed clamped edge
Movable clamping device
When there is warpage under 2 mm, the
inkspots in the center of the board are also
within the focus of the digital camera. When
all the tolerances are taken into account,
this value is reduced to 1.5 mm.
You should also note that the warpage
reduces the component height.
Magnetic pin support
PCB