SIPLACE DX1DX2-Spec-设备性能参数-EN-DMS.pdf - 第37页

37 01005 Placement In its standard version, the SIPLACE DX1/DX2 is designed for placement of 01005 components (0.4 mm x 0.2 mm). The SIPLACE component library already contai ns the contours and dim ensions of 01005 compo…

Vision Sensor Technology

PCB Position Recognition

Bad Board Recognition

Ink Spot Criteria

Methods • Synthetic fiducial recognition method

• Mean gray scale value

• Histogram method

• Template matching

Shapes and sizes of fiducials/structures for

synthetic fiducials

other methods

For dimensions of synthetic fiducials, see page

min. 0.3 mm

max. 5 mm

Masking material Good coverage

Recognition time Depends on the method: 20 ms - 200ms

Description

In the cluster technology

each subpanel is assigned

an inkspot.

If this is present during the

measurement via the PCB

vision module, the corre-

sponding subpanel is popu-

lated.

This function helps prevent

unnecessary costs caused

by placement of defective

panels.

Technical data for PCB position detection

PCB fiducials

Local fiducials

Library of bad panel recognition

Up to 3 (subpanels and multiple panels)

Up to 6 for the long board option (optional PCB fiducials

are output by the optimization.)

Up to 2 per PCB (may be of different type)

Up to 255 fiducial types per subpanel

Image analysis Edge detection method (singular feature) based on gray

scale values

Lighting method Front lighting

Fiducial recognition time 0.1 s

Field of vision 5.78 mm x 5.78 mm

01005 Placement

In its standard version, the

SIPLACE DX1/DX2 is

designed for placement of

01005 components

(0.4 mm x 0.2 mm).

The SIPLACE component

library already contains the

contours and dimensions of

01005 components. Spe-

cially developed component

nozzles of type 1005 are also

available for the SIPLACE

DX1/DX2. These are

adjusted to the shape and

size of the 01005 compo-

nents and have - as with all

other SIPLACE nozzles - a

highly wear-proof ceramic tip

and flexible nozzle seat. This

guarantees maximum preci-

sion and process reliability.

Optimized pickup is guaran-

teed by the ideal feeding

conditions in the SIPLACE X

feeder module. The smaller

the elements to be picked up,

the more accurate the pickup

needs to be.

Pickup is performed contact-

free to compensate minor

inaccuracies e.g. from com-

ponent or pocket tolerances

and to prevent mechanical

damage to the components.

The design of the SIPLACE

X feeder modules takes this

problem into account: new

motors and the reduced use

of fine mechanics help.

Small components can be

placed without perfor-

mance loss, with minimum

pitch and irrespective of the

larger components which are

next to the 01005 --compo-

nent. This equates to true

01005 capability. As a rule

with 01005 placement, a

finely tuned overall 01005

process is the basic require-

ment if you want to achieve

excellent results.

All the process parameters

must be optimized. The

SIPLACE team will be

pleased to advise you on

how to do this.

01005 measurement

results and ambient condi-

tions

As the dpm values and

pickup rates for 01005 place-

ment depend greatly on the

respective measuring condi-

tions, it is not advisable to

specify these without consid-

ering the corresponding

ambient conditions.

The following table shows typical values for 01005 placement,

which can be achieved with a SIPLACE DX1/DX2, provided

the relevant underlying conditions are fulfilled:

Machine type SIPLACE DX1 or

SIPLACE DX2

Placement head SpeedStar with component

camera type 23

Nozzle type 1005

Feeder module type 2x8mm SIPLACE X feeder

module

Station software 706.01 or later

SIPLACE Pro 10.0 or later

Machine Maintenance

We recommend that you

have your SIPLACE DX1/

DX2 serviced on a regular

basis to keep it in prime con-

dition during productive use.

The SIPLACE DX1/DX2

Maintenance Guide contains

recommendations for the

maintenance intervals. All

maintenance tasks are

explained in detail with clear

diagrams.

The maintenance intervals

are weekly, 3 monthly (only

when the SIPLACE is config-

ured with a C&P20 head)

and 6 monthly.

For simpler organization of

line maintenance during daily

production operations, the

degree of complexity is spec-

ified for each maintenance

task. These levels are minor

and major maintenance.

Weekly maintenance tasks

The weekly maintenance

tasks are simple minor

maintenance work. This

requires no special training

and can be performed by the

line operators, with the help

of the maintenance guide.

Weekly maintenance of one

DX line takes a maximum of

1 hour, an optimum proce-

dure can be much faster.

3 monthly and

6 monthly maintenance

tasks

The 3 monthly (only when

the DX1/DX2 is configured

with a C&P20 head) and 6

monthly maintenance tasks

are a combination of simple

and more complex major

work. We recommend that

you train your operating or

service personnel before

performing these more com-

plex tasks.

The 3 monthly and 6 monthly

maintenance can usually be

performed when the solder-

ing furnace for the line is ser-

viced.