SIPLACE DX1DX2-Spec-设备性能参数-EN-DMS.pdf - 第27页

27 Component Feeding SIPLACE DX Changeover Table (Option) Technical Data DX changeover table dimensions Component trolley with 6 0 tracks ( length x widt h) Component trolley with 3 0 tracks ( length x widt h) 760 mm x 8…

Component Feeding

SIPLACE DX Changeover Table (Option)

DX Changeover Table

The DX changeover tables

are independent and easily

maneuverable modules. The

SIPLACE DX machines can

accommodate two DX

changeover tables, each with

60 tracks. If a WPC5/WPC6

is set up at one of the loca-

tions, the other location can

accommodate a DX change-

over table with 30 tracks.

Just like the fixed DX tables,

the DX changeover tables

are optimized for the use of

2x8 mm SIPLACE tape

feeder modules when using

8 mm tapes. By using 30 of

these feeder modules, you

can achieve a full setup

capacity of 60 8mm tracks.

The tape reels are taken up

into the tape container of the

DX changeover table. A cut-

ting device on the machine

automatically cuts the used

tape material. The DX

changeover tables can be

set up directly on the

machine or at an external

setup area with feeder mod-

ules. The benefits of offline

setup are that the configura-

tions can be prepared with-

out stopping the line.

This allows the setup to be

changed very quickly using

the DX changeover table

principle.

The SIPLACE DX change-

over table also support fast

setting up and tearing down

of feeder modules even dur-

ing the placement process.

The component feeders are

at rest during the placement

process - allowing tapes to

be spliced without stopping

the machine.

With the help of an optional

component barcode reader

and the Setup Center option,

the barcodes on the tape

reels can be read and

checked.

This ensures the correct

assignment of components

to tracks and the traceability

of PCB placement with the

Traceability software.

For safety reasons, unoccu-

pied locations are fitted with

so-called dummy feeder

modules.

DX Changeover Table

Tape container

Changeover table

Component Feeding

SIPLACE DX Changeover Table (Option)

Technical Data

DX changeover table dimensions

Component trolley with 60 tracks (length x

width)

Component trolley with 30 tracks (length x

width)

760 mm x 864 mm

760 mm x 471 mm

Height with folded-up handles

900 mm (PCB transport height:

930 mm (PCB transport height:

950 mm (PCB transport height:

934 mm

964 mm

984 mm

Weight DX changeover table with 60 tracks

Without feeder modules

Fully configured with feeder modules

Weight DX changeover table with 30 tracks

Without feeder modules

Fully configured with feeder modules

104 kg

266 kg

76 kg

157 kg

Tape reel diameter

Standard

Maximum

up to 432 mm (17")

483 mm (19")

Locations for feeder modules

DX changeover table with 60 tracks

DX changeover table with 30 tracks

max. 30 feeder modules, each of 2x8 mm X

max. 15 feeder modules, each of 2x8 mm X

Max. component feeding

(Two DX changeover tables on the SIPLACE

DX1/DX2)

When using a Waffle Pack Changer:

60 feeder modules, each with 2x8 mm X

45 feeder modules, each with 2x8 mm X

Changeover time for component trolley < 1 minute

Feeder module types (SIPLACE X)

With adapter

Tape feeder modules, reject conveyor, linear

vibratory feeder and label feeder.

Component Feeding

X Tape Feeder Modules

SIPLACE X tape feeder

modules are intelligent tape

feeder modules for flexible

production environments,

which simplify upgrading and

conversion tasks consider-

ably. All SIPLACE X feeder

modules support tape splic-

ing as a standard, which pre-

vents machine stoppages

when refilling.

The benefits at a glance:

Conversion-friendly

• The SIPLACE X tape

feeder modules are

designed as single-track

feeder modules. This min-

imizes any restrictions

during conversion.

• Omega profiles on the

tape feeder module and

table facilitate safe and

reliable upgrading and

conversion of tape feeder

modules during ongoing

production.

Robust

• Brushless motors extend

the service life of the X

tape feeder modules.

Intelligent

• A unique tape feeder mod-

ule ID ensures a precise

assignment of the compo-

nent to the tape feeder

module. This makes reli-

able setup verification

very simple.

• Component pitch, feeder

speed and other functions

are automatically set

when the setup program is

downloaded.

High feeding accuracy

• Closed loop control path

measurement ensures

highly accurate compo-

nent feeding, even for

01005 placements.

Operator-friendly

• Contactless data and

power transmission make

it easier to attach/remove

the tape feeder modules

• A menu-controlled LCD or

LED display supports the

user with current informa-

tion.

• A multicolor status display

signals the operating sta-

tuses of the X tape feeder

module:

- Green: "Ready for

operation/in cur-

rent setup"

- Orange: "Compo-

nent runs empty"

- Red: "Malfunc-

tion"

- LED off: "Tape

feeder module is

not in current setup

and can be torn

down"

a) 01005-compliant

b) In 4mm increments

Technical Data

Tape feeder

module

L x H

[mm]

Width

[mm]

Loca-

tion

Transport

increment

[mm]

Max. tape

height

[mm]

8 mm X

587x200 10.8 1 1/2/4/8 3.5

2x8 mm X 587x200 22.9 2 1/2/4/8 3.5

12 mm X 587x200 22.6 2 4 - 16

6.5

Smart Feeder 12 mm 587x200 22.6 2 4 - 16

16 mm X 587x200 34.4 3 4 - 20

Smart Feeder 16 mm 587x200 22.6 2 4 - 20

24 mm X 587x200 34.4 3 4 - 32

32 mm X 587x200 46.2 4 4 - 40

44 mm X 587x200 58.0 5 4 - 52

56 mm X 587x200 69.8 6 4 - 64

72 mm X 587x200 81.6 7 4 - 80

88 mm X 587x200 105.2 9 4 - 96

Tape reels 178 to 483 mm in diameter (7“ - 19“)

Changeover time 8 s