00198610-02_VD_712.1_R19-1_DE_EN.pdf - 第31页
Station Software 712.1 (R19-1) / Version Description 05/2019 Edition 31 6 Hardware Specifications 6.1 Supported Feeder Types The following feeders are suppo rted by the 71 2.1 station software v ersion: Feeder Modules fr…
Station Software 712.1 (R19-1) / Version Description 05/2019 Edition
30
– For tape feeders:
The nominal pickup position is displayed as red and dotted crosshairs in the Positions
correction teaching dialog and the Check tape position at pickup position of track machine
function dialog.
Figure 5-9: Positions correction teaching dialog
The pickup position is determined by the current Pickup position feeder setting and the
Fiducial measurement result which may be zero if neither fiducial nor pocket recognition are
specified.
Compatible mode: Complete
– Optimized selection controls for the touch screen.
The selection of a tray inside an MTC, WPC or generic automatic tray (i.e. JTF) widget can be
done by zooming in when the user touches the widget.
Compatible mode: Complete
– Windows 10 can be used for station computers on SIPLACE SX V2 placement machines.
Station Software 712.1 (R19-1) / Version Description 05/2019 Edition
31
6 Hardware Specifications
6.1 Supported Feeder Types
The following feeders are supported by the 712.1 station software version:
Feeder Modules from ASM Assembly Systems
– 4 mm – 104 mm X-feeder
– 8 mm - 88 mm E (E-series only)
– 2x8 mm X-feeder
– 16 mm XN-feeder
– Surftape AX (8 mm, 12 mm, 16 mm)
– LED feeder TE
LED feeder HS
– SIPLACE Glue Feeder
– SIPLACE JTF-S (X-series S and SX1/SX2 V2 only)
– SIPLACE JTF-M (X-series S, X4i S micron and SX1/SX2 V2 only)
– SIPLACE JTF-ML (TX-series only)
– SIPLACE JTF-ML2 (TX-series only)
– JTF-MW E (E-series only)
– Arbitrary Carrier X
– Conveyor Carrier X
– Carrier X (XTH) (X2, X3, X4 on location 2 and 4 only)
– Carrier SX (SX1/SX2 with Twin Head and CPP head only)
– Stick feeder with X-adapter
– MTC2 (X2, X3, X4 on location 2 and 4, X2 S, X3 S, X4 S on location 2)
– WPC5/WPC6 (SX1/SX2, X-series S on location 2)
– SIPLACE Wafer Systems (CA-series only)
Processing Modules from ASM Assembly Systems
– MeasuringFeeder X
– Label feeder with X-adapter
– Reject conveyor with X-adapter
– Linear Dipping Unit X
– Linear Dipping Unit 2 X
– Linear Dipping Unit E (E-series only)
– Splice sensor X-feeder
Station Software 712.1 (R19-1) / Version Description 05/2019 Edition
32
Modules from 3
rd
party suppliers
– FFI feeders:
HanSan LED feeder
Top Engineering LED feeder
Data IO RoadRunners
– IPTE Multi Stick Feeder:
IPTE Multistick 60 AX
IPTE Multistick XL80 AX
– SEMO CRF80 tape feeder
Restrictions:
– For larger feeders, the camera is positioned very close to the edge of the travel range.
Therefore, only a part of the component might be visible during pickup position teaching.
6.2 Camera Systems and Component Ranges
Detailed information on the used camera systems and component ranges for the placement heads
can be found in the respective machine specifications and/or User Manuals of the placement
machines.