00198610-02_VD_712.1_R19-1_DE_EN.pdf - 第32页
Station Software 712.1 (R19-1) / Version Description 05/2019 Edition 32 Modules from 3 rd party suppliers – FFI feeders: HanSan LED feeder Top Engineering LED feeder Data IO RoadRunners – IPTE Multi Stick Feeder: IPTE Mu…
Station Software 712.1 (R19-1) / Version Description 05/2019 Edition
31
6 Hardware Specifications
6.1 Supported Feeder Types
The following feeders are supported by the 712.1 station software version:
Feeder Modules from ASM Assembly Systems
– 4 mm – 104 mm X-feeder
– 8 mm - 88 mm E (E-series only)
– 2x8 mm X-feeder
– 16 mm XN-feeder
– Surftape AX (8 mm, 12 mm, 16 mm)
– LED feeder TE
LED feeder HS
– SIPLACE Glue Feeder
– SIPLACE JTF-S (X-series S and SX1/SX2 V2 only)
– SIPLACE JTF-M (X-series S, X4i S micron and SX1/SX2 V2 only)
– SIPLACE JTF-ML (TX-series only)
– SIPLACE JTF-ML2 (TX-series only)
– JTF-MW E (E-series only)
– Arbitrary Carrier X
– Conveyor Carrier X
– Carrier X (XTH) (X2, X3, X4 on location 2 and 4 only)
– Carrier SX (SX1/SX2 with Twin Head and CPP head only)
– Stick feeder with X-adapter
– MTC2 (X2, X3, X4 on location 2 and 4, X2 S, X3 S, X4 S on location 2)
– WPC5/WPC6 (SX1/SX2, X-series S on location 2)
– SIPLACE Wafer Systems (CA-series only)
Processing Modules from ASM Assembly Systems
– MeasuringFeeder X
– Label feeder with X-adapter
– Reject conveyor with X-adapter
– Linear Dipping Unit X
– Linear Dipping Unit 2 X
– Linear Dipping Unit E (E-series only)
– Splice sensor X-feeder
Station Software 712.1 (R19-1) / Version Description 05/2019 Edition
32
Modules from 3
rd
party suppliers
– FFI feeders:
HanSan LED feeder
Top Engineering LED feeder
Data IO RoadRunners
– IPTE Multi Stick Feeder:
IPTE Multistick 60 AX
IPTE Multistick XL80 AX
– SEMO CRF80 tape feeder
Restrictions:
– For larger feeders, the camera is positioned very close to the edge of the travel range.
Therefore, only a part of the component might be visible during pickup position teaching.
6.2 Camera Systems and Component Ranges
Detailed information on the used camera systems and component ranges for the placement heads
can be found in the respective machine specifications and/or User Manuals of the placement
machines.
Station Software 712.1 (R19-1) / Version Description 05/2019 Edition
33
7 ASM Software Environment
7.1 SIPLACE Pro Programming System Version 16.1
The SIPLACE Pro programming system version 16.1 supports the SIPLACE X-series, X-series S,
SX-series, DX-series, CA-series and TX-series placement machines with the 712.1 station
software version.
Compatible mode: SIPLACE Pro 15.x
NOTICE
For a detailed description of the programming system, see the SIPLACE Pro version
description and the online help system.
7.2 ASM OIS Version 16.1
Software version 16.1 of the ASM OIS monitoring system supports the SIPLACE X-series,
X-series S, SX-series, DX-series, CA-series and TX-series placement machines.
NOTICE
A detailed description can be found in the software description "Getting started with OIS"
and the online help system for OIS.
7.3 ASM Setup Center Version 9.5
Software version 9.5 of the ASM Setup Center supports the SIPLACE X-series, X-series S,
SX-series, DX-series, CA-series and TX-series placement machines.
Compatible mode: ASM Setup Center 8.x
NOTICE
A detailed description can be found in the software description "Getting started with
Setup Center" and the online help system for Setup Center.
7.4 ASM Traceability Version 5.6
Software version 5.6 of ASM Traceability supports the SIPLACE X-series, X-series S,
SX-series, DX-series, CA-series and TX-series placement machines.
Compatible mode: SIPLACE Traceability 4.x
NOTICE
A detailed description can be found in the "Traceability User Guide".