00198610-02_VD_712.1_R19-1_DE_EN.pdf - 第34页
Station Software 712.1 (R19-1) / Version Description 05/2019 Edition 34 8 Restrictions For details concerning po ssible machine configurations, please c onsult the latest version of th e machine specification. Restrictio…
Station Software 712.1 (R19-1) / Version Description 05/2019 Edition
33
7 ASM Software Environment
7.1 SIPLACE Pro Programming System Version 16.1
The SIPLACE Pro programming system version 16.1 supports the SIPLACE X-series, X-series S,
SX-series, DX-series, CA-series and TX-series placement machines with the 712.1 station
software version.
Compatible mode: SIPLACE Pro 15.x
NOTICE
For a detailed description of the programming system, see the SIPLACE Pro version
description and the online help system.
7.2 ASM OIS Version 16.1
Software version 16.1 of the ASM OIS monitoring system supports the SIPLACE X-series,
X-series S, SX-series, DX-series, CA-series and TX-series placement machines.
NOTICE
A detailed description can be found in the software description "Getting started with OIS"
and the online help system for OIS.
7.3 ASM Setup Center Version 9.5
Software version 9.5 of the ASM Setup Center supports the SIPLACE X-series, X-series S,
SX-series, DX-series, CA-series and TX-series placement machines.
Compatible mode: ASM Setup Center 8.x
NOTICE
A detailed description can be found in the software description "Getting started with
Setup Center" and the online help system for Setup Center.
7.4 ASM Traceability Version 5.6
Software version 5.6 of ASM Traceability supports the SIPLACE X-series, X-series S,
SX-series, DX-series, CA-series and TX-series placement machines.
Compatible mode: SIPLACE Traceability 4.x
NOTICE
A detailed description can be found in the "Traceability User Guide".
Station Software 712.1 (R19-1) / Version Description 05/2019 Edition
34
8 Restrictions
For details concerning possible machine configurations, please consult the latest version of the
machine specification.
Restrictions to features in previous versions can be found in the Station Software V7xx Feature
Description, item no. [00197741-xx].
Station Software 712.1 (R19-1) / Version Description 05/2019 Edition
35
9 Corrected Errors
712.1 Station Software
The 712.1 station software version contains all error corrections of the previous 7xx versions.
Additionally, the following errors have been corrected in this version:
Error no.
Error description
G50005117
Machine crashes when plausibility check for fiducial fails.
G50015717
Compressed air deactivation does not work.
G50017432
Pin Picker does not put support pins back in the magazine.
G50017946
Placement bug.
G50019002
Calibration steps are missing after installing SIPLACE Smart Pin Support.
G50022073
No error distribution and help with frequent vision error.
GD1-153469701
Problems with teaching of Pickup Correction. The individual vision images are
not displayed correctly.
GD1-158641701
Not all the possible support pins have been placed.
GD1-158665601
The feed axis moves into the limit switch after calibration of pick-up position.
GD1-159509218
Board rotation cannot be determined with the selections.
GD1-160027001
Bench inspection TH is not executed even though the result shows it was
successful.
GD18744-4401
The open and closed vacuum is too low, even though the status is OK.
Table 9-1: Corrected errors station software version 712.1
712.0
Error no.
Error description
D1-142591801
An incorrect conveyor width was set after reboot.
D1-145486748
Various conveyor errors.
D1-146654832
During the height reference run, a nozzle was expected that was missing. The
nozzle could not be provided at the current activity level.
D1-148088101
The CPP placement head removed a component that was already placed by
the Twin VHF placement head.
D1-148126901
Width adjustment was performed during running production on a SIPLACE
TX2i placement machine.
D1-149428701
Night run with cyclic board transport stopped: disturbed CAN communication,
channel 1. Error message Placement status is unknown: Gantry 1,