00196737-04_IM_eWinXP_SSW70x_DE_EN.pdf - 第14页
Windows XP Embedded SP2 / Installation Manual Ausgabe 05/2011 Edition 5 Calibrating the touch screen Now the touch screen has to be calib rat ed (station computer only). ► Log on as Administrato r and enter a password . …
Windows XP Embedded SP2 / Installation Manual Ausgabe 05/2011 Edition
The following window is displayed:
Figure 4-2: Window SIPLACE XP embedded Configurator
► Enter the station IP-address for SIPLACE Pro LAN (required for a station computer only) and
choose the suitable computer configuration.
The SIPLACE settings are automatically performed and the computer reboots.
After the reboot, you are logged on as Operator.
► Remove the software CD from the DVD drive.
13
Windows XP Embedded SP2 / Installation Manual Ausgabe 05/2011 Edition
5 Calibrating the touch screen
Now the touch screen has to be calibrated (station computer only).
► Log on as Administrator and enter a password.
► Calibrate the touch screen as described in the installation manual for the station software.
If you have installed Windows XP Embedded in one-computer operation or on a machine
computer in two-computer operation, the installation is completed now.
► Install the SIPLACE machine software as described in the installation manual for the station
software.
If you have installed Windows XP Embedded on a Vision computer in two-computer operation:
► Perform the steps in chapter 6.
14
Windows XP Embedded SP2 / Installation Manual Ausgabe 05/2011 Edition
6 Restoring the initial configuration
The following steps only have to been performed, if you have installed Windows XP Embedded
on a Vision computer in two-computer operation:
► Reconnect the keyboard to the machine computer.
► Switch the video multiplexer back to the machine computer.
► Unplug the USB cable for the DVD drive from the Vision computer and plug it into the machine
computer.
► Install the SIPLACE machine software as described in the installation manual for the station
software.
15