Nordson-EFD-8040-Operating-Manual.pdf - 第10页

ValveMate 8040 Controller 10 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide. Specifications NOTE: Speciﬁcations and technical details ar…

ValveMate 8040 Controller

9www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.

Nordson EFD Product Safety Statement (continued)

Important Disposable Component Safety Information

All Nordson EFD disposable components, including syringe barrels, cartridges, pistons, tip caps, end caps,

and dispense tips, are precision engineered for one-time use. Attempting to clean and re-use components will

compromise dispensing accuracy and may increase the risk of personal injury.

Always wear appropriate protective equipment and clothing suitable for your dispensing application and adhere to

the following guidelines:

• Do not heat syringe barrels or cartridges to a temperature greater than 38° C (100° F).

• Dispose of components according to local regulations after one-time use.

• Do not clean components with strong solvents (MEK, acetone, THF, etc.).

• Clean cartridge retainer systems and barrel loaders with mild detergents only.

• To prevent ﬂuid waste, use Nordson EFD SmoothFlow

™

pistons.

Action in the Event of a Malfunction

If a system or any equipment in a system malfunctions, shut off the system immediately and perform the following

steps:

1. Disconnect and lock out system electrical power. If using hydraulic and pneumatic shutoff valves, close and

relieve pressure.

2. For Nordson EFD air-powered dispensers, remove the syringe barrel from the adapter assembly. For Nordson

EFD electro-mechanical dispensers, slowly unscrew the barrel retainer and remove the barrel from the actuator.

3. Identify the reason for the malfunction and correct it before restarting the system.

Disposal

Dispose of equipment and materials used in operation and servicing according to local codes.

ValveMate 8040 Controller

10 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.

Specifications

NOTE: Speciﬁcations and technical details are subject to change without prior notiﬁcation.

Item Speciﬁcation

Cabinet size 18.3

W x 5.1H x 8.6D cm (7.20W x 2.00H x 3.38D")

Weight 0.3 kg (0.6 lb)

Cycle rate Exceeds 400 per minute

Time range 0.001–99.9 s

Electrical power input 24 VDC, 1.25 Amp maximum

Input AC (to power supply) 100–240 VAC (±10%), 50/60Hz, 1.0 Amp

Output DC (from power supply) 24 VDC, 1.25 Amp maximum

Feedback circuits 5–24 VDC NC solid-state switch, 100 mA maximum

Cycle initiate 5–24 VDC signal

Ambient operating conditions

Temperature: 5–45° C (41–113° F)

Humidity: 85% RH at 30° C, 40% at 45° C non-condensing

Height above sea level: 2,000 m (6,562 ft) maximum

Product Classiﬁcation

Installation Category I

Pollution Degree 2

Approvals CE, UKCA, TÜV, RoHS, WEEE, China RoHS

RoHS标准相关声明标准相关声明 (China RoHS Hazardous Material Declaration)

产品名称

Part Name

有害物质及元素

Toxic or Hazardous Substances and Elements

铅

Lead

(Pb)

汞

Mercury

(Hg)

镉

Cadmium

(Cd)

六价铬

Hexavalent

Chromium

(Cr6)

多溴联苯

Polybrominated

Biphenyls

(PBB)

多溴联苯醚

Polybrominated

Diphenyl Ethers

(PBDE)

外部接口

External Electrical

Connectors

X 0 0 0 0 0

O: 表示该产品所含有的危险成分或有害物质含量依照EIP-A, EIP-B, EIP-C

的标准低于SJ/T11363-2006 限定要求。

Indicates that this toxic or hazardous substance contained in all the homogeneous materials for this part, according to EIP-A, EIP-B, EIP-C is below the

limit requirement in SJ/T11363-2006.

X: 表示该产品所含有的危险成分或有害物质含量依照EIP-A, EIP-B, EIP-C

的标准高于SJ/T11363-2006 限定要求.

Indicates that this toxic or hazardous substance contained in all the homogeneous materials for this part, according to EIP-A, EIP-B, EIP-C is above the

limit requirement in SJ/T11363-2006.

WEEE Directive

This equipment is regulated by the European Union under WEEE Directive (2012/19/EU). Refer to

www.nordsonefd.com/WEEE for information about how to properly dispose of this equipment.

ValveMate 8040 Controller

11www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.

Front Panel Buttons

SEL — Pressing the SEL button scrolls sequentially through ···· and

···· channel time settings appropriate to the MODE selection. Time in

seconds is displayed on the three digit LED display.

MODE — Pressing the MODE

button scrolls through the menu at the left of

the LED. Also used for clearing ALARM faults.

RUN — Enables external initiate inputs. The cycle button is disabled.

SETUP — Setup / testing / and modiﬁcation of ···· and ····

TIMER modes.

PURGE — Enables individual or simultaneous purge of spray valves.

Used in conjunction with SEL

channel selector, PURGE can

occur with or with out nozzle air function. See page22 for complete

PURGE sequence details.

TEACH — For easy setting / teach of times modes longer spray cycle

applications.

DELAY — Allows user entry to increase or decrease post nozzle air

delay upon completion of spray valve actuation.

CYCLE — Pressing the CYCLE button will provide different results according

to the selected MODE.

TIME SET — Pressing the UP

or DOWN buttons will change valve-on time

for the selected valve(s) or the DELAY time. Pressing both buttons

simultaneously will zero out the time. These buttons are enabled in the RUN

, SETUP , and DELAY modes only.

ALARM INDICATORS — At the beginning of any of the spray activities, if

ALARM circuit is open, “ALr”

ﬂashes on the LED display. ALARM condition

needs to be corrected — either low pressure, low level, or other alarm open

circuit. After the circuit is restored, the ﬂashing “ALr”

becomes steady.

Press MODE button to resume normal operation.

Operating Features