00198487-02_Operation_Manual_E_by_DEK_EN.pdf - 第4页

Operation - Introduction 4 Role Of An Operator 1. To load Recipe for inspection. 2. To prepare the machine for production. 3. To keep machine in operation. 4. Basic troubleshooting. 5. End of shift task.

Operation - Introduction

1 Operation - Introduction

E by DEK Printer:

The printing machine that prints solder paste on to the PCB.

1. Monitor.

2. Unpasted PCB.

3. Stencil.

4. Pasted PCB.

5. USC Paper roll.

6. Solder paste pot.

Operation - Introduction

Role Of An Operator

1. To load Recipe for inspection.

2. To prepare the machine for production.

3. To keep machine in operation.

4. Basic troubleshooting.

5. End of shift task.

Operation - Safety

2 Operation - Safety

WARNING

Safety Notes

Any persons working on the machine must be familiar with the safety instructions in the user manual and observe this at all

times. The following safety instructions are only an excerpt from the chapter "Operational Safety" in the SIPLACE user manual.

For further detailed safety information please refer to the User Manual that was supplied with your machine. Please pay

attention to the safety instructions as delivered by our instructor.

General Warning Labels

1. Warning – Board Clamps

2. Danger of Crushing – Reaching in here can lead to injuries to

the arms and hands

3. Warning – Compressed Air.

4. Warning – Electrical danger