96722_AX-201 AX-301 AX501 Spec bookl.pdf - 第16页
Scanner specifications Connection RS-232 Baudrate 9600 kb/s Number of bits 7 Stopbit 1 Parity bit none X-on/X-off off Note: There are no scanners provided with the system. The A-Series uses a variety of toolbits to handl…
Each placement robot requires a toolbit exchange unit to exchange toolbits
automatically. In less than one second a toolbit is exchanged, while production
continues. Holding multiple positions a maximum flexibility for component range
and family setup is ensured
AX Toolbit exchange unit and dump bin
The A-Series is operated via a touch screen and a full graphical user interface. The
user interface complies to SEMI E95 to maximize ergonomics, ease of use and
minimize learning time. The interface can be set to different language modes. This
can be done while the production is running and is therefore, suited to multi-lingual
environments.
A wide range of languages is standard available, please check with the local
Assembléon representative for more details. All other languages can be made
available upon request.
Chinese Graphical User Interface
Board Identification (BI) can be used to provide barcode -ID and traceability
information. It features:
A check of the board ID versus the running placement program. On error the
system will block the board from entering the machine.
Board identification for traceability (see paragraph on traceability).
Barcode specifications
Types 1D and 2D
Length 1D: max. 1024
2D: to ISO/IEC 16022
Codes CODE39
2/5 Interleaved
CODE128
Data matrix ECC200
3.6 Toolbit
exchange
unit
Figure 8
3.7 User
interface
Figure 9
3.8 Board
Identification
Features
13 of 34
Scanner specifications
Connection RS-232
Baudrate 9600 kb/s
Number of bits 7
Stopbit 1
Parity bit none
X-on/X-off off
Note: There are no scanners provided with the system.
The A-Series uses a variety of toolbits to handle the wide range of components from
0.4 x 0.2mm (01005) up to 165mm long connectors. Each toolbit is designed to
ensure durability, minimal wear, whilst providing robust and delicate component
handling. The toolbits are connected to the placement head by a magnetic
connection or mechanical clamping.
Please refer to the Compatibility matrix on page 32 for an overview of the toolbit
and placement head relationship as well as the toolbit and component relationship.
Toolbits for the PH-SV, PH-LV and PH-DV
The magnetic connection between toolbit and placement head allows fast and
automatic exchange of the toolbit while ensuring a firm connection.
Toolbits for the PH-HA
The standard toolbits for the PH-HA incorporate two toolbits in one. This is referred
to as “dual telescoping toolbits”. There are 5 different outer toolbits, each of
different diameters. Located inside the outer toolbit, a choice of up to 5 inner
toolbits can be used thereby allowing a wide range of components to be placed
using the same placement head.
Mechanical grippers are available to pick and place components which cannot be
picked using vacuum toolbits. The standard gripper set contains a basic gripper with
3 jaw sets that can be adapted by the user to comply with the specific shape of the
component being placed.
Gripper
Max. component size 165 x 45mm
Max. component height 40mm (with restrictions)
Max. weight 50 gram
Clamp force 6.5 ± 0.5N
Placement force 4 - 40N
Variable through hole check 4 - 14N
4.0 Options
4.1 Toolbits
Figure 10
Options
14 of 34
Twin tape feeder, intelligent tape feeder and twin bulk feeder
Feeder Tape Pocket depth Reels Pitch support
width
TTF 8mm 3.5mm 7" - 13" 2,4
ITF 8mm 12mm 7" - 13" 2 ~ 56
15" optional
ITF 12mm SV 12mm 12mm 15" 2 ~ 56
ITF2 12mm 12mm 12mm 7" - 13" 2 ~ 56
15" optional
ITF2 16mm 16mm 12mm, 7" - 13", 2 ~ 56
15.4mm optional 15" optional
ITF2 24mm 24mm 12mm, 7" - 13", 2 ~ 56
16.5mm optional 15" and 22" optional
ITF2 32mm 32mm 12mm, 7" - 15", 2 ~ 56
16.5mm optional 15" and 22" optional
ITF2 44mm 44mm 12mm, 7" - 15", 2 ~ 56
16.5mm optional
ITF2 56mm 56mm 16.5mm, 7" - 15", 2 ~ 56
optional 22" optional
72mm Prec. Pro 72mm 18mm 7" - 15" 2 ~ 48
Univ. feeder
Component EIA Lanes EIA Component specifications
description Length (mm) Width (mm) Thickness
C0201 2 0.57 ~ 0.63 0.27 ~ 0.33 0.27 ~ 0.33
C0402 2 0.95 ~ 1.05 0.45 ~ 0.55 0.45 ~ 0.55
R0402 2 0.95 ~ 1.05 0.45 ~ 0.55 0.30 ~ 0.40
C0603 2 1.53 ~ 1.67 0.73 ~ 0.87 0.73 ~ 0.87
R0603 2 1.50 ~ 1.70 0.70 ~ 0.90 0.35 ~ 0.55
MELF R0604 2 1.50 ~ 1.70 Ø 0.90 ~ Ø 1.10
C0805T0.6 2 1.90 ~ 2.10 1.15 ~ 1.35 0.50 ~ 0.70
C0805T1.25 1 1.90 ~ 2.10 1.15 ~ 1.35 1.15 ~ 1.35
R0805 2 1.90 ~ 2.10 1.15 ~ 1.35 0.50 ~ 0.70
MELF R0805 1 1.90 ~ 2.10 Ø 1.15 - Ø 1.35
Please refer to the Compatibility matrix on page 31 for an overview of other compatible
feeders and their machine relationship.
4.2 Feeding
4.2.1 Specifications
Intelligent tape
feeders & Twin
tape feeders
Figure 11
4.2.2 Specifications
Bulk feeders
Options
15 of 34