96722_AX-201 AX-301 AX501 Spec bookl.pdf - 第8页
General specifications 6 of 34 Applicable standards: 98/37/EC CE Machine directive 89/336/EEC CE EMC directive 73/23/EEC CE Low voltage directive CSA/UL SMEMA Standard SEMI S2 Safety standard SEMI S8 Ergonomics standard …
2 General
specifications
General specifications
5 of 34
AX-501 AX-301 AX-201
Max output [CpH] 150.000 90.000 18.000
IPC output [CpH] 110.000 70.000 11.500
Highest accuracy class 40µm, Cpk>1.00 40µm, Cpk>1.00 20µm, Cpk>1.00
Interspacing 80µm 80µm 80µm
Pick performance 99,9 %
*1
99,9 %
*1
99.9%
*1
Placement quality < 20 PPM < 20 PPM < 20 PPM
Technical Uptime > 99.4%
*2
> 99.4%
*2
> 99.4%
Lifetime toolbit 2-4 Mio placements 2-4 Mio placements 2-4 Mio placements
(depending on type) (depending on type) (depending on type)
Component range SMD components SMD components Components
0.4 x 0.2mm 0.4 x 0.2mm 0.4 x 0.2mm
(01005) to (01005) to (01005) to
45 x 45mm 45 x 45mm 45 x 45mm or
66 x 23mm
165 x 45mm for odd
form components
Feeding positions 260 Using twin tape 156 Using twin tape 212 Using twin tape
[# x 8mm] 130 Using single tape 78 Using single tape (PH-DV)
47 Jedec trays 47 Jedec trays 106 Using single
tape (PH-DV)
376 Jedec trays
Feeding types (Twin-) tape, (Twin-) tape, Tape, stick, tray,
(twin-) bulk, stick, (twin-) bulk, stick, wafflepack, stack tube
tray, etc. tray, etc. GPAX, radial,
direct die, etc
Programmable 1.5N to 8N 1.5N to 8N 0.9 to 40N, lower
placement force forces with restrictions
Board range min (L x W) 50 x 50mm 50 x 50mm 50 x 50mm
50 x 25mm optional 50 x 25mm optional 50 x 25mm optional
Board range max (L x W) 515 x 390mm 475 x 390mm 515 x 457mm
515 x 457mm optional 475 x 457mm optional
Board transport direction Standard left to right Standard left to right Standard left to right
Optional right to left Optional right to left Optional right to left
Power supply 200-480V 3-phase 200-480V 3-phase 200-480V 3-phase
47-63Hz, 7 kVA 47-63Hz, 5 kVA 47-63Hz, 7 kVA
Air supply 6-8 bar, 230Nl/min 6-8 bar, 150Nl/min 6-8bar, 190Nl/min
(tape feeding only) (tape feeding only)
6-8 bar, 290Nl/min 6-8 bar, 185Nl/min
(Tape and bulk feeding) (Tape and bulk feeding)
Dimensions (incl. trolleys)
(L x W x H) 3720x2285x1290mm 2760x2285x1290mm 1850x2240x1550mm
Front side feeding Total 8.5 m
2
Total 6.3 m
2
Total 4.1 m
2
Weight (excl trolleys) <3200kg <2500kg <1900kg
Noise <72 dB(A) @1m <72 dB(A) @1m <72 dB(A) @1m
distance distance distance
General specifications
6 of 34
Applicable standards: 98/37/EC CE Machine directive
89/336/EEC CE EMC directive
73/23/EEC CE Low voltage directive
CSA/UL
SMEMA Standard
SEMI S2 Safety standard
SEMI S8 Ergonomics standard
SEMI E10 RAM
SEMI E58 ARAM
SEMI E95 Human Interfaces standard
IPC 9850
ASMB factory Acceptance Protocol
*1
: Based on tape feeders smaller than 24mm, excluding 01005 components.
*2
: Based on an average configuration, containing 10 placement robots, incl.
corrective maintenance, excl. feeder assists.
The machine base contains all mechanical interfaces for connection of the placement
robots, feeder and tray trolleys and board transport units. It also holds the controls and
supply systems as well as safety covers and doors to provide safe working conditions for the
operator. Three bases are available: AX-501 holding five trolley positions, AX-301
holding three trolley positions, and AX-201 holding a maximum of four trolley positions.
Machine base
Each board transport unit contains a run-in section, where boards from the previous
machine are received, and a run-out section, where boards are transferred to the next
machine. In between the run-in and run-out section is the working area of the machine
where the components are placed on the board. The automated transport unit adjusts to
the correct width and thickness of the board and all boards in the working area are clamped
on the side. Boards in the working area can be supported using pins or strips with
magnetic interface.
Board transport
AX-501 AX-301 AX-201
Minimum board 50 x 50mm, 50 x 50mm, 50 x 50mm,
dimensions (L x W) 50 x 25mm optional 50 x 25mm optional 50 x 20mm optional
Maximum board 515 x 390mm, 475 x 390mm, 515 x 457mm
dimensions (LxW) 515 x 457mm optional 475 x 457mm optional
Board thickness 0.3mm - 6mm 0.3mm - 6mm 0.3mm - 6mm
Optional other Optional other Optional other
transport systems are transport systems are transport systems are
available like flexfoil available like flexfoil available like flexfoil
or 10 mm for carriers or 10 mm for carriers or 11 mm for carriers
Board weight Max. 2 kg. Max. 2 kg. Max. 3 kg.
Board transport Standard left to right, Standard left to right, Standard left to right,
optional right to left optional right to left optional right to left
Transport mechanism Indexing Indexing Conveyor belt
(Walking beam) (Walking beam)
Board transport SMEMA (940-965mm) SMEMA (940-965mm) SMEMA(940-965mm)
and Japanese and Japanese and Japanese
(885-915mm) (885-915mm) (885-915mm)
3 Features
3.1 AX Base
Figure 1
3.2 Board
Transport
Features
7 of 34