DECAN_S2_Maintenance(Eng_Ver4.3).pdf - 第27页
MEMO Advanced Chip Shooter DE CAN S2 M ain ten an ce H and bo ok 1-1 7 Conditions for Main tenanc e
chapter 1
This Chapter describes the work environment and working tools for the maintenance of
the machine.
Conditions for Maintenance
Advanced Chip Shooter
DECAN S2 Maintenance Handbook
1-16
Tools for Maintenance
4. Grease List
Part No. Part Name Use Specifications Ref.
CM01-900473 TRI-FLOW [59ML] - Nozzle TRI-FLOW -
HP09-000258 SUPPLY,OIL-GREASE-GUN_MG70_THK
- X Frame LM Guide
- Y Frame LM Guide
- Conveyor Lead Screw
- Conveyor Lead LM Guide
- X Frame Ball Screw
MG70
70g Exclusive use
GUN
CM02-900022 GREASE GADUS S2 V220-2
- Head Mirror CAM
- Conveyor LM Guide
- Conveyor Lead Screw
- X Frame Ball Screw
GADUS S2 V220-2 -
CM02-000083 GREASE-GREASE_AFE-CA+70_THK;SYNTHETIC,OL
- X Frame LM Guide
- Y Frame LM Guide
AFE-CA+70 -
CM02-000084 GREASE-GREASE_AFE-CA+400_THK;OIL,SYNTHET AFE-CA+400 -
CM02-900008 GREASE AFF-70 Head Spindle AFF-70 -
MEMO
Advanced Chip Shooter
DECAN S2 Maintenance Handbook
1-17
Conditions for Maintenance
chapter 2
Inspection Items for Maintenance
Advanced Chip Shooter
DECAN S2 Maintenance Handbook
2-1
Daily Inspections
Check-up List
Replacement
Time
Reference
Time
required
Period No Inspection Item Measures Tools
Daily
D-1 Nozzle Inspect and clean Air gun, swab, Ethyl Alcohol 2years
After use of the
machine
10 Minutes
D-2 Dump Box Clean
After use of the
machine
5 Minutes
D-3 Feeder, Feeder Base Clean Brush, cloth
After use of the
machine
10 Minutes
D-4 Backup Table Clean Cloth
After use of the
machine
5 Minutes
D-5 Air Filter Inspect and replace 1years Frequent inspection 30 Minutes
D-6 Mist Separator Filter Inspect and replace 1years Frequent inspection 30 Minutes
D-7 Fix Camera Cover Glass Inspect and clean
Ultra fine fiber cloth, alcohol,
Wrench
10 Minutes
D-8 Fix Camera Lens Inspect and clean Air Ejector, Wrench 10 Minutes
Setting the replacement period for parts
ㆍ Based on the regulated use environment.
ㆍ If the use environment is poor, the intervals for part inspection and replacement can be shortened.
ㆍ In the above table, C/S means our designated C/S company (STS) or our overseas local agents.
chapter 2
Inspection Items for Maintenance
Daily Inspections