DECAN_S2_Maintenance(Eng_Ver4.3).pdf - 第50页
DE CAN S2 M ain ten an ce H and bo ok 3-1 5 chapt er 3 Daily Inspe ction Advanced Chip Shooter Checking and Cleaning Fix Camera Cover Glass Checking and Cleaning Fix Camera Cover Glass Remove foreign material on the glas…
DECAN S2 Maintenance Handbook
3-14
chapter 3
Daily Inspection
Advanced Chip Shooter
Checking and replacing Mist Separator Filter
Daily Inspection
Step 4.
Separate the container by turning it counterclockwise
Step 5.
Turn the filter clockwise to separate it.
Step 6.
Release the emergency stop as described in "Releasing
'Emergency Stop' mode" on page 1-10 and perform the
operation again.
DECAN S2 Maintenance Handbook
3-15
chapter 3
Daily Inspection
Advanced Chip Shooter
Checking and Cleaning Fix Camera Cover Glass
Checking and Cleaning Fix Camera Cover Glass
Remove foreign material on the glass to prevent part recognition error.
Tool for Maintenance
Ultra fine fiber cloth, alcohol, Wrench
Measures
Step 1.
Move the X-frame to the rear.
For more details, refer to "Forward movement of the front X-frame"
on page 1-3.
When the fix camera is located at the front according to the option,
move the X frame to the rear.
Step 2.
Press the 'STOP' and 'RESET' buttons in order after
pressing the 'EMG' button on the OP panel to stop
operation.
For more details, refer to "How to perform emergency stop" on page
1-2.
Step 3.
Separate Screw by using Srew Driver.
(Time required: 10min / No. D-7)
DECAN S2 Maintenance Handbook
3-16
chapter 3
Daily Inspection
Advanced Chip Shooter
Checking and Cleaning Fix Camera Cover Glass
Daily Inspection
Step 4.
Remove the backup pin
①Moisten the clean cloth with alcohol
②Clean the cover glass