DECAN_S2_Maintenance(Eng_Ver4.3).pdf - 第62页

Mon thly Inspe ction chapt er 5 Advanced Chip Shooter DE CAN S2 M ain ten an ce H and bo ok 5-1 Cleaning Head Spindle T ool for M aintenanc e Cleaning liquid, ultra fine fiber cloth, air gun Measures Step 1. Move t he Fr…

Advanced Chip Shooter

MEMO

DECAN S2 Maintenance Handbook

4-8

Weekly Inspection

Monthly Inspection

chapter 5

Advanced Chip Shooter

DECAN S2 Maintenance Handbook

5-1

Cleaning Head Spindle

Tool for Maintenance

Cleaning liquid, ultra fine fiber cloth, air gun

Measures

Step 1.

Move the Front X Frame and Rear X Frame to both

ends by referring to "Forward movement of the front

X-frame" on page 1-3 and "Backward movement of the

rear X-frame" on page 1-7.

Step 2.

Press the 'STOP' and 'RESET' buttons in order after

pressing the 'EMG' button on the OP panel to stop

operation.

For more details, refer to "How to perform emergency stop" on page

1-2.

chapter 5

Monthly Inspection

Step 3.

Saparate the coil tube from vacuum filter

Cleaning Head Spindle

(Time required: 30min / No. M-1)

Monthly Inspection

chapter 5

Advanced Chip Shooter

DECAN S2 Maintenance Handbook

5-2

Cleaning Head Spindle

Monthly Inspection

Step 4.

Remove the nozzle

Step 5.

Put the cloth underneath the spindle

Step 6.

Cleaning the interior of the tube by an air gun.

Caution

Using the air gun without putting on goggles may cause injury to

operator's eyes. Be sure to wear goggles when using the air gun.

Step 7.

Release the emergency stop as described in "Releasing

'Emergency Stop' mode" on page 1-10 and perform the

operation again.