00191134-03.pdf - 第182页

GEM for SIPLACE V5.01 Page 182 of 252 ©Siemens AG, all rights reserved 9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ of the sec ond transport tr ack is in fast mode 2. A value of -1 indic ates an err or 2012012 SV …

100%1 / 245
GEM for SIPLACE V5.01
©Siemens AG, all rights reserved page 181 of 252
9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ
is in slow mode 1.
Bit 5: If bit is set, the motor of the output conveyor
is in fast mode.
Bit 6: If bit is set, the motor of the output conveyor
is in slow mode 2.
Bit 7: If bit is set, the motor of the input conveyor
is in fast mode.
A value of -1 indicates an error
2012010 SV U1 OUTPUTPORTBYTE4
Bit 0: The Interface signal "Request" from the
preceding station is set.
Bit 1: The Interface signal "Sent" from the
preceding station is set.
Bit 2: The Interface signal "Permission" to the
following station is set.
Bit 3: The Interface signal "Received" to the
following station is set.
Bit 4: If bit is set, the motor of the width
adjustment is in fast mode.
Bit 5: If bit is set, the width is being adjusted
smaller.
Bit 6: If bit is set, the width is being adjusted
larger.
Bit 7: If bit is set the component counter will count
one component.
A value of -1 indicates an error
2012011 SV U1 OUTPUTPORTBYTE5
Bit 0: If bit is set, lifting table of the second
transport track is moving up.
Bit 1: If bit is set, lifting table of the second
transport track is moving down.
Bit 2: If bit is set, the motor of the center
conveyor of the second transport track is in
slow mode.
Bit 3: If bit is set, the motor of the center
conveyor of the second transport track is in
fast mode.
Bit 4: If bit is set, the motor of the output conveyor
of the second transport track is in slow
mode 1.
Bit 5: If bit is set, the motor of the output conveyor
of the second transport track is in fast
mode 1.
Bit 6: If bit is set, the motor of the output conveyor
of the second transport track is in slow
mode 2.
Bit 7: If bit is set, the motor of the input conveyor
GEM for SIPLACE V5.01
Page 182 of 252 ©Siemens AG, all rights reserved
9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ
of the second transport track is in fast
mode 2.
A value of -1 indicates an error
2012012 SV U1 OUTPUTPORTBYTE6
Bit 0: The Interface signal "Request" to the
preceding station of the second transport
track is set.
Bit 1: The Interface signal "Sent" to the preceding
station of the second transport track is set.
Bit 2: The Interface signal "Permission" to the
following station of the second transport
track is set.
Bit 3: The Interface signal "Received" to the
following station of the second transport
track is set.
Bit 4: If bit is set, the motor of the width
adjustment of the second transport track is
in fast mode.
Bit 5: If bit is set, the width of the second
transport track is being adjusted smaller.
Bit 6: If bit is set, the width of the second
transport track is being adjusted larger.
Bit 7: Operates the ceramic substrate centering
of the second transport track.
A value of -1 indicates an error
2012013 SV U2 ERRORTYPE
Type of the most recent error
2 Transport
3 Machine error
4 Track error
5 Miscellaneous
A value of 0 indicates an error.
2012014 SV U2 GANRTYONERROR
Gantry associated with the most recent error
A value of 0 indicates an error.
2012015 SV U2 SEGMENTONERROR
Segment number associated with the most recent
error
A value of 0 indicates an error.
2012016 SV U2 TRACKONERROR
Track number associated with the most recent error
GEM for SIPLACE V5.01
©Siemens AG, all rights reserved page 183 of 252
9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ
event
A value of 0 indicates an error.
2012017 SV U2 ERRORINFO1
A value of 0 indicates an error.
2012018 SV U2 ERRORINFO2
A value of 0 indicates an error.
2012019 SV L PICKUPERRORS
Pick-Up Errors. This data item will be reset when a
new Process Program is downloaded to a SIPLACE
machine.
/
/
$&RPSRQHQW1DPH!
,7UDFN1XPEHU!
8)HHGHU7\SH!
,/HYHO!
,'LYLVLRQ!
80DFKLQH6LGH!
8)HHGHU$FFHVVHV3HU3&%!
83LFN8S(UURUV!
82SWLFDO(UURUV!
8&RSODQDULW\(UURUV!
!

!
FeederAccessesPerPCB will be reset when a PCB
reaches the center conveyor.
If the component was picked up from a feeder /HYHO
will contain -1. In the case that the component was
picked up from a tray in the waffle pack changer
7UDFN1XPEHU is set to -1. If both values are not equal
to -1 the component was picked up from a „manual
tray“.
For a detailed description of the data item see „4.2
Data Item Dictionary“.
An empty list indicates an error.
2012020 SV A PICKUPDATARESETPOINT