00191134-03.pdf - 第27页

GEM for SIPLACE V5.01 ©Siemens AG, all rights r eserved page 27 of 252  3URFHVV6WDWHV The Proc ess State Diagram illus trates in detail the proc essing at the SIPLACE. Machine Initialization Single Function Processi…

100%1 / 245
GEM for SIPLACE V5.01
Page 26 of 252 ©Siemens AG, all rights reserved
Variable Name VID
OFFLINESUBSTATE 1002010
ONLINEFAILED 1002008
ONLINESUBSTATE 1002009
CONTROLSTATE 1002006
PREVIOUSCONTROLSTATE 1002007
 5HODWHG(YHQWV
The following lists the collection events (CEIDs) which are relevant to the Control State.
For a more complete description of these events, see "Appendix B -- Collection Events" or
the description in this chapter.
Collection Event CEID
GemControlStateLOCAL 1000003
GemControlStateREMOTE 1000004
GemEquipmentOFFLINE 1000005
GEM for SIPLACE V5.01
©Siemens AG, all rights reserved page 27 of 252
 3URFHVV6WDWHV
The Process State Diagram illustrates in detail the processing at the SIPLACE.
Machine
Initialization
Single
Function
Processing
7
1
2
3
4
5
6
3URFHVV6WDWH'LDJUDP
GEM for SIPLACE V5.01
Page 28 of 252 ©Siemens AG, all rights reserved
 6,3/$&(3URFHVV6WDWH7UDQVLWLRQV
# From Trigger To Description
1 Unknown Power-Up Machine
Initialization
At power-up, the Equipment
defaults to the 0DFKLQH
LQLWLDOL]DWLRQ state.
2 Machine
Initialization
Machine is
ready
Processing All data is available to
produce a board. All
peripheral equipment like
the Vision system is
initialized and the machine
has finished the reference
runs correctly. In this state
the machine will start its
work, when a PCB is put on
the input conveyor
3 Processing new Data form
the Host
Machine
Initialization
New production data is
send during the machine is
processing a board. The
board will be finished and
the machine will go to the
0DFKLQHLQLWLDOL]DWLRQ state
4 Machine
Initialization
a) Fatal Error
during machine
initialization
b) Stop-Button
on GUI
Single
Function
When a fatal error occurs
during machine initialization
it will automatically switch to
VLQJOHIXQFWLRQ mode.
In the case that the
operator press the Stop-
Button on the GUI, the
machine will first end the
board in the center
conveyor (if there is one)
and will then enter the
VLQJOHIXQFWLRQ mode.
5 Single
Function
Start-Button on
GUI
Machine
Initialization
When the machine is in
single function mode, the
operator press the Start-
button and the Prestate
was machine Initialization
the machine will return to
the 0DFKLQHLQLWLDOL]DWLRQ
state.
6 Processing a) Fatal Error
during machine
initialization
b) Stop-Button
on GUI
Single
Function
When a fatal error occurs
during processing the
machine will automatically
switch to VLQJOHIXQFWLRQ
mode.
In the case that the
operator press the Stop-
Button on the GUI, the
machine will first end the
board in the center
conveyor (if there is one)
and will then enter the
VLQJOHIXQFWLRQ mode.